PD IEC/TR 61850-80-5:2024
Communication networks and systems for power utility automation Part 80-5: Guideline for mapping information between IEC 61850 and IEC 61158-15

Standard No.

PD IEC/TR 61850-80-5:2024

Release Date

2024

Published By

British Standards Institution (BSI)

Lastest

PD IEC/TR 61850-80-5:2024

Scope

This part of IEC 61850, which is a Technical Report, specifies the mapping rules for building and configuring a system using both IEC 61850 and IEC 61158-6 (Industrial communication networks – Fieldbus specification, CPF Type 15, Modbus) protocols by utilizing gateways between IEC 61850 and IEC 61158-6 IEDs / subsystems. The objective is to enable operational run-time data exchange among these IEDs / subsystems, and to automate the configuration of a gateway as much as possible. Please note that for the purposes of this document, "Modbus" is used to represent both serial Modbus (Modbus RTU) and IEC 61158-6 (Modbus TCP). Within the capability of each protocol, some configuration attributes (IEC 61850-7-3:2010+AMD1:2020 attributes with functional constraint CF) are also mapped in addition to the operational real-time data. The rules specified in this document are based on the published standards and do not make any proposed changes to IEC 61850 or 61158-6. This standard does not specify any rules for an IEC 61850 IED to directly communicate with a Modbus IED and vice versa, except through a gateway. This document does not mandate which data items that a particular IED shall support, regardless of whether the implementation uses Modbus or IEC 61850. Instead this document provides rules specifying how a gateway maps any given data item from one protocol to the other, given that the data item is already available and is transmitted using one of the protocols. Similarly, this document does not mandate which mapping rules a given gateway shall support. When this document is republished as a Technical Specification, conformance requirements will be identified. This document recognizes that there will be situations in which a user will require that a gateway perform non-standard protocol mappings. Non-standard mappings are outside the scope of this document. This document also recognizes that gateways typically manipulate the data passing through them in a variety of ways. Some of these functions include alarm trigger grouping, data suppression, interlocking and command blocking. Conformance to this document does not preclude a gateway from performing such functions, even though this document primarily specifies "straight through" mapping of Modbus data to IEC 61850-7-3:2010+AMD1:2020 data. Subclause 7.4 of this document describes how some of these functions may be specified to a gateway by a mapping tool using equation notation in XML. However, some of these functions may be too complex for a mapping tool to specify in an automated manner.

PD IEC/TR 61850-80-5:2024 Referenced Document

• IEC 61158-5-15:2010 Industrial communication networks - Fieldbus specifications - Part 5-15: Application layer service definition - Type 15 elements
• IEC 61784-2:2019 Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
• IEC 61850-7-2:2010 Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI)
• IEC 61850-7-2:2010/AMD1:2020 Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI)
• IEC 61850-7-3:2010 Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes
• IEC 61850-7-3:2010/AMD1:2020 Amendment 1 - Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes
• IEC 61850-7-4:2010 Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data classes
• IEC 61850-7-4:2010/AMD1:2020 Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes
• IEC TS 61850-2:2019 Communication networks and systems for power utility automation - Part 2: Glossary

PD IEC/TR 61850-80-5:2024 history

• 2024 PD IEC/TR 61850-80-5:2024 Communication networks and systems for power utility automation Part 80-5: Guideline for mapping information between IEC 61850 and IEC 61158-15