ICS 13.220.20
Fire protection
Standards in This Category
EVS-EN 14972-9:2020
Fixed firefighting systems - Water mist systems - Part 9: Test protocol for machinery in enclosures not exceeding 260 m³ for open nozzle systems
EVS-EN 14972-8:2020
Fixed firefighting systems - Water mist systems - Part 8- Test protocol for machinery in enclosures exceeding 260 m³ for open nozzle systems
LVS EN 3-8:2021
Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7
This document establishes the technical specifications for the design, pressure resistance, and mechanical action testing of portable fire extinguishers. It specifically addresses units with a
LVS EN 3-8:2022
Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7
This document establishes the technical requirements and test methods for portable fire extinguishers designed to comply with specific European standards regarding structural integrity and
LVS EN 54-16:2008
Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
This technical specification outlines the requirements for control and indicating equipment within voice alarm notification systems, specifically designed for fire detection and alerting
LVS EN 54-25:2008
Fire detection and fire alarm systems - Part 25: Components using radio links
This technical specification addresses the integration of radio wave-based devices within fire detection and alarm systems. It establishes comprehensive requirements and test methods specifically for
LVS EN 54-27:2019
Fire detection and fire alarms systems - Part 27: Duct smoke detectors
This document establishes technical requirements and test methods specifically designed for smoke detectors operating within moving air streams. It addresses the unique challenges posed by airflow
LVS EN 54-26:2015
Fire detection and fire alarm systems - Part 26: Carbon monoxide detectors - Point detectors
This technical specification defines the essential requirements and test methods for point-type carbon monoxide detectors integrated into fire detection and fire alarm systems. It focuses
LVS EN 54-7:2022
Fire detection and fire alarm systems - Part 7: Smoke detectors - Point smoke detectors that operate using scattered light, transmitted light or ionization
This document establishes the fundamental requirements, testing methods, and classification criteria for local smoke detectors designed to detect smoke in fire conditions. The scope covers devices
LVS EN 54-28:2019
Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
This standard establishes the essential requirements and testing methods for non-resettable linear heat detectors designed for fire detection and fire alarm systems. The document focuses specifically
LVS EN 54-25+AC:2019
Fire detection and fire alarm systems - Part 25: Components using radio links
This technical specification defines the requirements and test methods for wireless signal components used within fire detection and fire alarm systems. The document addresses the specific needs of
LVS EN 54-30:2015
Fire detection and fire alarm systems - Part 30: Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat sensors
This technical specification addresses the performance and testing requirements for point-type fire detectors that integrate both carbon monoxide and heat sensing technologies. The document outlines
LVS CEN/TS 54-32:2015
Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems
This document serves as a technical specification developed by the Latvian Standards Board in collaboration with European standardization bodies to address the specific requirements of voice
LVS EN 54-16:2019
Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
This document establishes technical requirements for control and indicating equipment used in voice fire alarm notification systems. It addresses the specific needs of systems designed to convey
LVS EN 54-12:2020
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
This document establishes technical requirements and test methods for linear beam smoke detectors used within fire detection and alarm systems. It defines the performance criteria necessary to ensure
LVS EN 54-30:2018
Fire detection and fire alarm systems - Part 30: Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat sensors
This document outlines technical specifications for addressable fire detection and alarm systems, specifically focusing on the thirtieth installment concerning multi-sensor detectors. It details
LVS CEN/TS 54-14:2019
Fire detection and fire alarm systems - Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance
This technical specification provides a comprehensive framework for the lifecycle management of fire detection and fire alarm systems. It covers essential stages ranging from initial planning and
LVS EN 54-31+A1:2016
Fire detection and fire alarm systems - Part 31: Multi-sensor fire detectors - Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors
This technical specification addresses a specialized aspect of fire safety infrastructure, specifically focusing on point detectors designed to identify hazardous conditions through multiple sensing
LVS EN 54-28:2016
Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
This document establishes technical specifications for one type of device within the broader category of fire detection and fire alarm systems. It specifically addresses linear heat detectors that
LVS EN 54-13+A1:2020
Fire detection and fire alarm systems - Part 13: Compatibility and connectability assessment of system components
This document establishes technical requirements and test procedures for evaluating the compatibility and interconnection of components within fire detection and fire alarm systems. It focuses on