ICS 13.340.30
Respiratory protective devices
Standards in This Category
LVS EN 405+A1:2009
Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
LVS EN 403:2004
Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking
LVS EN 402:2003
Respiratory protective devices - Lung governed demand self- contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking
LVS EN 404:2005
Respiratory protective devices for self-rescue - Filter self-rescuer from carbon monoxide with mouthpiece assembly
LVS EN 529:2006
Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document
LVS EN 1146:2006
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking
This standard establishes comprehensive requirements for self-contained open-circuit breathing apparatus equipped with an air cylinder and a full face mask, specifically designed for escape from
LVS EN 1825-2:2003
Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance
This technical document establishes essential guidelines for the selection of rated sizes, as well as the installation, operation, and technical maintenance procedures for fat separators. It serves
LVS EN 1827+A1:2009
Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
This technical specification establishes comprehensive requirements for respiratory protection equipment, specifically addressing half masks without inhalation valves and half masks equipped with
LVS EN 12021:2014
Respiratory equipment - Compressed gases for breathing apparatus
This standard establishes essential requirements and test methods for compressed gases used in breathing apparatus. It defines specific purity criteria, including limits for contaminants such as
LVS EN 12941:2024
Respiratory protective devices - Powered filtering devices incorporating a loose fitting respiratory interface - Requirements, testing, marking
This document establishes comprehensive requirements for powered air-purifying respirators equipped with independent respiratory protection barriers. It outlines specific procedures for testing the
LVS EN 12942:2024
Respiratory protective devices - Powered filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking
This document specifies the technical requirements, testing procedures, and marking criteria for electrically powered filtering facepieces designed to integrate with full-face, half-face, or
LVS EN 13274-8:2003
Respiratory protective devices - Methods of test - Part 8: Determination of dolomite dust clogging
This document specifies a standardized procedure for evaluating the efficiency of respiratory protective devices against certain types of airborne particulate matter. It focuses specifically on the
LVS EN 13274-7:2019
Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
This document specifies a test method for determining the penetration of solid particles through filtering materials used in respiratory protective equipment. It establishes the procedures required
LVS EN 13274-2:2019
Respiratory protective devices - Methods of test - Part 2: Practical performance tests
This document establishes the test procedures for evaluating the usability characteristics of respiratory protective devices. It outlines specific methodologies to assess how these protective systems
LVS EN 13274-6:2003
Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air
This document outlines a specific procedural framework developed for evaluating respiratory protective equipment, focusing on the quantification of carbon dioxide levels within the inhaled air. It
LVS EN 13274-3:2002
Respiratory protective devices - Methods of test - Part 3: Determination of breathing resistance
This document outlines a comprehensive testing methodology focused on measuring the breathing resistance of respiratory protective equipment. Developed in alignment with European technical
LVS EN 13274-5:2002
Respiratory protective devices - Methods of test - Part 5: Climatic conditions
This technical specification outlines the specific procedures for evaluating respiratory protective devices under defined climatic conditions. It serves as a critical component within a broader
LVS EN 13274-1:2002
Respiratory protective devices - Methods of test - Part 1: Determination of inward leckage and total inward leckage
This document specifies the methodology for evaluating the airtightness and overall air tightness of respiratory protective devices. The testing procedures outlined provide a standardized framework
LVS EN 13794:2003
Respiratory protective devices - Self-contained closed- circuit breathing apparatus for escape - Requirements, testing, marking
This document outlines specific technical requirements for self-contained closed-circuit breathing apparatuses designed exclusively for emergency escape. It establishes comprehensive criteria
LVS EN 13949:2003
Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking
This document specifies the requirements, test methods, and labeling criteria for autonomous breathing apparatus designed for diving in compressed nitrogen-oxygen mixtures and oxygen. It is intended