ICS 13.340.99
Other protective equipment
Standards in This Category
LVS EN 365+AC:2020
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
This document outlines the general requirements for personal protective equipment designed to prevent falls, covering essential aspects such as usage, maintenance, periodic inspection, repair,
LVS EN 341:2011
Personal fall protection equipment - Descender devices for rescue
This technical specification outlines requirements for personal protective equipment specifically designed for fall arrest and rescue operations. It establishes the essential performance criteria and
LVS EN 358:2019
Personal protective equipment for work positioning and prevention of falls from a height - Belts and lanyards for work positioning or restraint
This standard specifies requirements and test methods for personal protective equipment designed for work positioning and fall restraint. It applies to safety harnesses and lanyards intended to limit
LVS EN 16716:2017
Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods
This technical specification outlines the essential safety requirements and corresponding test methods for avalanche airbag systems designed for mountaineering equipment. It defines the performance
SM EN 341:2014
Personal protective equipment for fall arrest. Rescue descent devices
This document outlines the technical requirements and test methods for rescue descent devices used as part of personal protective equipment for fall arrest. It specifically addresses devices designed
SM SR EN 362:2010
Individual Protection Equipment Against Falls from Height. Connecting Components
The document establishes specific technical requirements and test methods for connecting components used within personal protective equipment designed to prevent falls from heights. It defines the
SM SR EN 365:2010
Personal Protective Equipment Against Falls from Height. General Requirements for Instructions for Use, Maintenance, Periodic Inspection, Repair, Marking and Packaging
This document establishes the general requirements for personal protective equipment designed to prevent falls from height. It provides comprehensive guidelines covering the essential aspects of
SM SR EN 355:2010
Personal Fall Protection Equipment. Energy Absorbers
This standard outlines the technical specifications and test methods for energy absorbers used in personal fall arrest systems. The document addresses the design requirements necessary to limit the
SM SR EN 1891:2010
Personal fall protection equipment. Low elongation core rope systems.
This technical document outlines the requirements for personal protective equipment designed specifically for fall protection systems utilizing low-elasticity core ropes. The standard establishes
SM SR EN 361:2010
Personal protective equipment against falls from height. Complex harnesses
This document establishes technical specifications for personal protective equipment designed to prevent falls from heights, specifically focusing on the design, testing, and performance requirements
SM SR EN 364+AC:2010
Individual fall protection equipment. Test methods
This technical specification outlines the fundamental testing procedures required for personal protective equipment designed to prevent falls from heights. It establishes rigorous methodologies to
SM SR EN 353-2:2010
Personal fall protection equipment. Part 2: Sliding fall arrester with flexible anchor support
This document specifies requirements and tests for fall arrest devices featuring a flexible anchor point guide. Designed to be used in conjunction with a personal fall arrest harness, the device is
SM SR EN 354:2010
Personal protective equipment against falls from height. Connection means
This document establishes specific technical requirements and test methods for connection devices used within personal fall protection equipment. These components are designed to link an individual
SM SR EN 360:2010
Personal protective equipment for fall protection. Part 1: Retractable fall arresters
This standard defines the technical specifications and safety requirements for retractable fall arresters, a critical component of personal equipment designed to prevent injuries from falls at
SM SR EN 353-1:2010
Personal fall protection equipment. Part 1: Rope grabs for rigid anchor rails
This technical specification establishes comprehensive requirements for the design, construction, and performance of rigid anchor point slide-type fall arresters intended for personal protective use.
SM SR EN 795:2010
Protection against falls from height. Anchorage devices. Requirements and tests
This standard establishes comprehensive technical requirements and corresponding test methods for anchor devices used in equipment designed to prevent falls from a height. It is specifically tailored
HRN EN 13374:2025
Temporary edge protection systems -- Product specification -- Test methods (EN 13374:2025)
MSZ EN 16716:2017
MSZT
Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods
MSZ EN 13374:2013
MSZT
Temporary edge protection systems. Product specification. Test methods
MSZ EN 1598:2012
MSZT