ICS 17.140.50
Electroacoustics
Standards in This Category
LVS EN 60318-6:2008
Electroacoustics - Simulators of human head and ear - Part 6: Mechanical coupler for the measurements on bone vibrators (IEC 60318-6:2007)
This specification outlines the technical requirements for a mechanical coupler designed to measure characteristics of bone conduction devices within the field of electroacoustics. The document
LVS EN 60500:2017
Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz
This specification outlines the technical requirements for hydrophone characteristics operating within the frequency range from 1 Hz to 500 kHz. It defines the fundamental parameters and measurement
LVS EN IEC 60565-2:2020
Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 2: Procedures for low frequency pressure calibration
This technical specification establishes a comprehensive framework for the calibration of hydrophones operating within the low-frequency pressure range, aligning with international acoustic
LVS EN IEC 60565-1:2020
Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 1: Procedures for free-field calibration of hydrophones
This technical specification establishes the fundamental procedures for calibrating hydrophones in terms of their free-field response. It outlines the necessary experimental conditions and
LVS EN 60601-2-62:2015
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
This document establishes the specialized safety and essential performance requirements for high-intensity ultrasound therapy equipment used in medical settings. It serves as a harmonized European
LVS EN IEC 60601-2-37:2024
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
This document establishes essential safety and performance requirements for medical electrical equipment, specifically targeting ultrasound devices used for diagnosis and monitoring in healthcare
LVS EN 60645-1:2018
Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry
This specification defines the technical requirements and test procedures for equipment used in audiology, specifically focusing on pure tone audiometry and speech audiometry. It establishes the
LVS EN IEC 60601-2-66:2020
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems
This document establishes specific basic safety and performance requirements for hearing aids and hearing aid systems, serving as a specialized complement to general standards for electrical medical
LVS EN IEC 60645-6:2022
Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions
This standard defines the technical requirements and test methods for audiometers utilizing otoacoustic emissions. It specifies performance criteria, measurement conditions, and evaluation procedures
LVS EN 60645-5:2005
Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance
This technical specification addresses the requirements for electroacoustic equipment designed for audiometric testing, specifically focusing on devices used to measure acoustic impedance and
LVS EN IEC 60645-7:2025
Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory evoked potentials
This document establishes a technical specification for equipment used in the measurement of auditory evoked potentials, falling under the broader domain of electroacoustics. It addresses the
LVS EN IEC 60942:2018
Electroacoustics - Sound calibrators
This document serves as a technical specification for equipment designed to calibrate sound level meters within the field of electroacoustics. It outlines the precise performance requirements,
LVS EN 61012:2002
Filters for the measurement of audible sound in the presence of ultrasound
This document specifies technical requirements for filters used in the measurement of audible sounds when ultrasonic components are present. It addresses the specific challenges arising from the
LVS EN 61043:2002
Electroacoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones
This technical specification establishes the requirements and methods for measuring the performance of paired pressure-sensitive microphone systems designed for acoustic intensity measurements. These
LVS EN 61094-8:2013
Electroacoustics - Measurement microphones — Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison (IEC 61094-8:2012)
This technical specification outlines a procedure for determining the free-field sensitivity of working standard microphones through comparative measurements within the field of electroacoustics. It
LVS EN 61094-5:2017
Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
This technical specification establishes a standardized methodology for the comparative calibration of working reference microphones under pressure within the field of electroacoustics. It provides
LVS EN 61094-3:2017
Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
This technical specification defines the methodologies for calibrating laboratory reference microphones using the reciprocity technique under free-field conditions. It serves as a critical component
LVS EN 61094-2:2009
Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique (IEC 61094:2009)
This technical document establishes the primary procedures for calibrating laboratory standard microphones using the reciprocity method. It serves as a specialized guide within the field of
LVS EN 61161:2013
Ultrasonics - Power measurement - Radiation force balances and performance requirements
This document establishes comprehensive requirements for the performance of sound intensity meters utilized in measuring ultrasound power. It outlines specific procedures and technical criteria
LVS EN 61183:2002
Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
This document establishes a comprehensive framework for the calibration of sound level meters operating within both non-diffuse and diffuse acoustic fields. The procedures outlined ensure consistent