ICS 17
METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA
20 sub-categories · 34,458 standards
Sub-categories
17.020
Metrology and measurement in general
1,896 standards
17.040
Linear and angular measurements
6,245 standards
17.040.01
Linear and angular measurements in general
488 standards
17.040.10
Limits and fits
647 standards
17.040.20
Properties of surfaces
1,618 standards
17.040.30
Measuring instruments
3,090 standards
17.040.99
Other standards related to linear and angular measurements
53 standards
17.060
Measurement of volume, mass, density, viscosity
1,631 standards
17.080
Measurement of time, velocity, acceleration, angular velocity
212 standards
17.100
Measurement of force, weight and pressure
729 standards
17.120
Measurement of fluid flow
2,113 standards
17.120.01
Measurement of fluid flow in general
199 standards
17.120.10
Flow in closed conduits
975 standards
17.120.20
Flow in open channels
842 standards
17.140
Acoustics and acoustic measurements
7,038 standards
17.140.01
Acoustic measurements and noise abatement in general
1,497 standards
17.140.20
Noise emitted by machines and equipment
2,506 standards
17.140.30
Noise emitted by means of transport
939 standards
17.140.50
Electroacoustics
1,641 standards
17.140.99
Other standards related to acoustics
99 standards
Standards in This Category
KS B ISO 14978
KATS
Geometrical product specifications (GPS) — General concepts and requirements for GPS measuring equipment
PD IEC/TS 61340-5-4:2026
BSI
Electrostatics Part 5-4: Protection of electronic devices from electrostatic phenomena — Compliance verification
DIN/TR 45610-2:2026-04
Low-frequency sound – Part 2: Supplementary information on the method of measurement, evaluation and assessment of low-frequency sound immissions
nsBAS CEN ISO/TR 20659-2:2026
ISBIH
Rheological test methods - Fundamentals and interlaboratory comparisons - Part 2: Determination of the time-dependent structural change (thixotropy)
nsBAS CEN ISO/TR 20659-1:2026
ISBIH
Rheological test methods - Fundamentals and interlaboratory comparisons - Part 1: Determination of the yield point
nsBAS EN 1434-3:2026
ISBIH
Thermal energy meters - Part 3: Data exchange and interfaces
nsBAS EN 15610+A1:2026
ISBIH
Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
nsBAS EN 17936:2026
ISBIH
Railway applications - Acoustics - Measurement of source terms for environmental noise calculations
nsBAS EN 16211:2026
ISBIH
Ventilation for buildings - Measurement of air flow rates on site - Methods
nsBAS EN IEC 60684-2:2026
ISBIH
Flexible insulating sleeving - Part 2: Methods of test
nsBAS EN IEC 60688:2026
ISBIH
Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals
nsBAS EN IEC 61340-5-3:2026
ISBIH
Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices
nsBAS EN IEC 61554:2026
ISBIH
Panel mounted equipment - Electrical measuring instruments - Dimensions for panel mounting
nsBAS EN IEC 61340-4-11:2026
ISBIH
Electrostatics - Part 4-11: Standard test methods for specific applications - Testing of electrostatic properties of composite IBC
nsBAS EN IEC 61340-4-9:2026
ISBIH
Electrostatics - Part 4-9: Standard test methods for specific applications - Garments - Resistive characterization
nsBAS EN IEC 61340-6-1/A1:2026
ISBIH
Electrostatics - Part 6-1: Electrostatic control in healthcare, commercial and public facilities - Healthcare
nsBAS EN IEC 61788-23:2026
ISBIH
Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of cavity-grade Nb superconductors
nsBAS EN IEC 61340-4-7:2026
ISBIH
Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization
nsBAS EN IEC 61340-4-6:2026
ISBIH
Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps
nsBAS EN IEC 61340-5-1:2026
ISBIH