Rivets

nsBAS EN 2553:2026

ISBIH

Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series

2026

nsBAS EN 2552:2026

ISBIH

Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series

2026

nsBAS EN 2550:2026

ISBIH

Aerospace series - Rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series

2026

nsBAS EN 2551:2026

ISBIH

Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series

2026

nsBAS EN 2555:2026

ISBIH

Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series

2026

LVS EN 6069:2023

Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series

2023-03-23

This technical specification defines requirements for aerospace fasteners, specifically focusing on countersunk rivets with a 100-degree head angle designed for precision fits. Part of an

LVS EN ISO 14588:2002

Blind rivets - Terminology and definitions

2002-02-28

This document establishes a comprehensive framework for standardizing terminology and definitions related to concealed knee mechanisms within the field of furniture and fixtures. It serves as a

LVS EN ISO 14589:2002

Blind rivets - Mechanical testing

2002-02-28

This technical document establishes a set of mandatory procedures for evaluating the mechanical properties of sleepwear, specifically targeting trousers designed for nighttime use. The scope focuses

LVS EN ISO 15975:2003

Closed end blind rivets with break pull mandrel and protruding head - Al/AlA

2003-02-27

This document establishes the technical requirements for single-sided open head pull-type rivets featuring a pre-punched head and a closed-end mandrel that fractures during installation. Specifically

LVS EN ISO 15984:2003

Open end blind rivets with break pull mandrel and countersunk head - A2/A2

2003-02-27

This standard establishes specific requirements for flat-headed pop rivets designed with a single-sided access capability. It covers rivets featuring a perforated head and a breakstem core,

LVS EN ISO 15982:2003

Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA

2003-02-27

This document specifies the technical requirements for single-part blind rivets with a breaking mandrel, designed with a counterbore head and manufactured from aluminum alloy to aluminum alloy

LVS EN ISO 15976:2003

Closed end blind rivets with break pull mandrel and protruding head - St/St

2003-02-27

This technical specification defines the requirements for one-side open-end round head rivets featuring a slotted body and a closed end head. The product is available in materials designated as St/St

LVS EN ISO 15981:2003

Open end blind rivets with break pull mandrel and protruding head - AlA/AlA

2003-02-27

This specification outlines the technical requirements and dimensions for one-sided blind round head rivets featuring a shear hole and a frangible tubular body, fabricated from aluminum alloy to

LVS EN ISO 15974:2002

Closed end blind rivets with break pull mandrel and countersunk head - AIA/St

2002-02-28

This document establishes technical requirements and inspection methods for specific fastening components known as countersunk rivets with break-off mandrels and closed countersunk heads. Designed

LVS EN ISO 15973:2002

Closed end blind rivets with break pull mandrel and protruding head - AIA/St

2002-02-28

This standard specifies requirements for round head blind rivets equipped with a perforated or breakable closed head and designed for single-direction removability, categorized under the AIA/St

LVS EN ISO 15978:2003

Open end blind rivets with break pull mandrel and countersunk head - AlA/St

2003-02-27

This document establishes technical specifications for a specific type of fastener characterized by a flat head with a slot and a single-sided access design. The standard details the required

LVS EN ISO 15979:2003

Open end blind rivets with break pull mandrel and protruding head - St/St

2003-02-27

This technical specification establishes comprehensive requirements and test methods for single-shear round head pop rivets featuring perforated and breakable heads, specifically manufactured from

LVS EN ISO 15980:2003

Open end blind rivets with break pull mandrel and countersunk head - St/St

2003-02-27

This document establishes comprehensive technical specifications for open-end flat head blind rivets featuring a detachable mandrel head, specifically constructed from stainless steel materials. The

LVS EN ISO 15983:2003

Open end blind rivets with break pull mandrel and protruding head - A2/A2

2003-02-27

This standard establishes technical specifications for unidirectionally accessible round-head rivets featuring a perforated and frangible tail, designated for use in the A2/A2 material class. It

LVS EN ISO 15977:2003

Open end blind rivets with break pull mandrel and protruding head - AlA/St

2003-02-27

This technical specification outlines the requirements for single-sided round head rivets featuring punched holes and break-neck blind heads, constructed from aluminum alloy or steel. The document