ICS 21.060.70
Clamps and staples
Standards in This Category
EVS-EN 13411-3:2022
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
EVS-EN 13411-7:2021
Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
EVS-EN 13411-9:2021
Terminations for steel wire ropes - Safety - Part 9: Solid thimbles
LVS EN 13411-5+A1:2020
Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
This document specifies safety requirements and test methods for wire rope clips used to terminate steel wire ropes. It covers spiral-type clips designed to secure the ends of wire ropes in various
SM EN 12095:2018
Plastic Drainage Systems. Clamps for Rainwater Drainage Systems. Method for Testing Clamp Strength
This document specifies a standardized test procedure designed to evaluate the mechanical strength of clips used in plastic drainage systems, specifically for rainwater discharge applications. The
SM SR EN 13411-1+A1:2011
End fittings for steel wire ropes. Safety. Part 1: Shackles for steel wire rope slings
This standard establishes the essential safety requirements and specifications for wedge socket assemblies used to terminate wire ropes in various industrial applications. The document outlines the
SM SR EN 13411-4+A1:2011
End fittings for wire ropes. Safety - Part 4: Metal or resin sleeve swaging
This document establishes specific technical requirements and testing methodologies for terminal components used with wire ropes, focusing on the safety aspects of metal or resin compression
SMV EN 13411-7+A1:2010
Wire rope cable terminals. Safety. Part 7: Symmetrical thimbles for cable end fixing
This document establishes specific safety requirements and testing methods for terminal equipment used with wire ropes, focusing particularly on symmetric compression sleeves designed for fixing
VG 85375-3:2022
SNV
Isolierte Rohrleitungen - Halterungsschellen - Teil 3: Technische Spezifikation; Text Deutsch und Englisch
This technical specification defines the detailed requirements for pipe support clamp systems designed for insulated piping applications. It establishes precise dimensional, material, and performance
MSZ EN 13411-3:2023
MSZT
Terminations for steel wire ropes. Safety. Part 3: Ferrules and ferrule-securing
VG 95514:2025
SNV
Zeltpflock mit Haken; Text Deutsch und Englisch
This technical specification defines requirements and test methods for a specific type of anchoring device characterized by a golden-colored pile featuring an integrated hook mechanism. The document
MSZ EN 13411-7:2021
MSZT
Terminations for steel wire ropes. Safety. Part 7: Symmetric wedge socket
MSZ EN 13411-7:2006
MSZT
Terminations for steel wire ropes. Safety. Part 7: Symmetric wedge socket
MSZ EN 13411-5:2003
MSZT
Terminations for steel wire ropes. Safety. Part 5: U-bolt wire rope grips
This document outlines the technical specifications and safety requirements for the installation of U-shaped wire rope clips used to form end fittings. It provides detailed guidance on the correct
MSZ EN 13411-1:2002
MSZT
Terminations for steel wire ropes. Safety. Part 1: Thimbles for steel wire rope slings
MSZ 2213:1979
MSZT
Lock washer for screws
This specification defines the technical requirements and testing methods for safety lock washers specifically designed for screw fastenings. The document outlines the geometric dimensions, material
MSZ 2238:1979
MSZT
Lock-nut for nuts
This document specifies the technical requirements for lock nuts designed for use with standard nuts in fastening applications. It defines the essential dimensional characteristics, mechanical
MSZ 2211:1979
MSZT
External tab washer
This technical specification outlines the requirements and test methods for a specific type of protective cover designed for insurance or similar containment applications. It establishes precise
KS F 4513
KATS
Body of turnbuckle for building
This technical specification addresses the design, dimensions, and mechanical properties of screw thread bodies utilized in construction applications. It establishes essential parameters to ensure
KS B 3635
KATS
COMBINATION WRENCHES
This document specifies technical requirements and test methods for combination wrenches, covering dimensions, material properties, and surface finish criteria. It applies to hand tools designed for