ICS 21.100
Bearings
3 sub-categories · 3,928 standards
Sub-categories
Standards in This Category
GS ISO 76:2010
Static load ratings
GS ISO 4383:2015
Multilayer materials for thin-walled plain bearings
GS ISO 281:2010
Dynamic load ratings and rating life
EVS-EN ISO 683-17:2023
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2023)
LVS EN ISO 8826-2:1997
Technical drawings - Rolling bearings - Part 2: Detailed simplified representation
This document establishes specific guidelines for the graphical representation of rolling bearings within technical drawings. It serves as a specialized segment of a broader standardization effort,
LVS EN 13001-3-4:2019
Cranes - General design - Part 3-4: Limit states and proof of competence of machinery - Bearings
This document establishes technical requirements for the design and safety assessment of railway vehicle wheelsets, specifically focusing on bearing components. It addresses the methodologies for
NAVY MS27642G-1998
BEARING, BALL, AIRFRAME, EXTRA LIGHT DUTY
JB/T 10860-2026
JB
Specification for Life Test of Joint Bearings
This document outlines a comprehensive procedural framework designed for evaluating the service life of spherical bearings under specific operating conditions. It establishes standardized methods for
JB/T 15540-2026
JB
Angular Contact Radial Spherical Plain Bearings for Aviation Self-Lubrication
This technical specification outlines the essential requirements for a specific type of self-lubricating spherical plain bearing designed for aviation applications. The document defines the necessary
JB/T 10858-2026
JB
Specification for Static Load Test of Spherical Plain Bearings
This document outlines the procedural requirements for evaluating the static load capacity of spherical plain bearings, commonly referred to as joint bearings. It establishes a standardized
JB/T 8874-2026
JB
Technical Specifications for Split Vertical Housing of Rolling Bearings
This technical specification outlines the requirements and testing methods for split vertical housing units designed for rolling bearings. It defines the dimensional parameters, material properties,
SM ISO 4379:2025
Slide bearings. Copper alloy bushings. Dimensions and tolerances
This technical specification outlines the dimensional requirements and tolerance limits applicable to copper alloy bearing liners used in sliding bearing applications. It establishes a unified
SM ISO 4385:2025
Bearing slides. Compressive test of materials for bearings
This document outlines the methodology for conducting compression tests on materials used in sliding bearings. It establishes uniform procedures to evaluate how bearing materials respond under
SM ISO 7905-4:2024
Bearing with sliding. Fatigue of sliding bearings. Part 4: Tests performed on multilayer metal bearing shells
This technical specification addresses the rigorous testing procedures for multi-layered rolling bearing shells used within sliding bearing systems. The document outlines specific methodologies to
SM ISO 3548-1:2024
Slide bearings. Thin-walled bushes with collar or without collar. Part 1: Tolerances, design characteristics and test methods
This standard defines the fundamental requirements for thin-walled mounted or unmounted half bearings, establishing precise specifications for dimensions, design characteristics, and associated
SM ISO 3547-2:2024
Slip clutches. Wrapped bushes. Part 2: Data for internal and external diameter control
This document establishes the technical requirements and acceptance criteria for the verification of bore and outside diameters on shafted sleeves used in driven pulley applications. It specifically
SM ISO 8443:2024
Rolling bearings. Radial ball bearings with outer ring with flange. Flange dimensions
This document outlines specific dimensional requirements for radial ball bearings that feature an outer ring with a flange. It establishes precise measurements for the flange itself, ensuring
SM ISO 3547-5:2022
Slides: Wrapped Bushes. Part 5: Verification of the External Diameter
This technical specification addresses the dimensional inspection procedures for the outer diameter of packing sleeves used in glide cabin assemblies. As the fifth component of a broader series, it
SM ISO 4386-3:2022
Slip bearings. Multilayer metallic slip bearings. Part 3: Liquid penetrant testing
This technical specification outlines the procedures for performing liquid penetration non-destructive testing on multi-layer metallic plain bearings. It establishes the fundamental criteria and
SM ISO 7905-3:2022
Sliding Bearings: Fatigue of Multilayer Metal Strip Bearing Material Sliding Bearings — Part 3: Test of Plain Metal Strip Bearings with Multilayer Material
This document specifies the test methods for evaluating the fatigue performance of multilayer metal self-lubricating bearing strips used in plain bearings. It details the procedures required to