ICS 23.040.01
Pipeline components and pipelines in general
Standards in This Category
LVS 419:2023
Internal gas pipelines. Installation
This technical specification addresses the requirements and guidelines for the installation of internal gas piping systems within buildings. It establishes the fundamental principles necessary to
LVS EN 877:2022
Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
This technical specification outlines the requirements for cast iron piping systems designed for drainage from engineering structures. It establishes the fundamental characteristics and performance
LVS 1079:2024
Gas supply systems. External gas pipelines up to 1,6 MPa (16 bar). Renewal of documentation of constructed gas pipeline systems
This document establishes comprehensive requirements for the modernization and updating of documentation related to outdoor natural gas pipeline systems designed for pressures up to 1.6 MPa, or 16
LVS 1080:2024
Engineering hatches
This document establishes comprehensive guidelines for the design, manufacture, and testing of portable engineering networks tailored for field operations. It outlines specifications regarding
LVS CEN/TR 1295-2:2006
Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
This document establishes a recognized technical reference for the structural design of ground pipelines under various load conditions. It provides an overview of national design methodologies
LVS CEN/TR 1295-3:2007
Structural design of buried pipelines under various conditions of loading - Part 3: Common method
This document serves as a technical report addressing the design principles for underground pipeline structures subjected to diverse loading conditions. It specifically outlines a general methodology
LVS CEN/TR 1295-4:2016
Structural design of buried pipelines under various conditions of loading - Part 4: Parameters for reliability of the design
This technical specification addresses the design of underground pipeline structures under various loading conditions, specifically focusing on structural reliability parameters. It provides detailed
LVS EN 1295-1:2019
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements
This document establishes a set of foundational principles for the structural design of underground pipes, specifically focusing on the general requirements applicable under various loading
LVS CEN/TS 1401-2:2025
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
This technical specification outlines a framework for assessing the conformity of rigid polyvinyl chloride (PVC-U) systems designed for subterranean drainage and wastewater self-drainage
LVS EN 1401-1+A1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
This technical document establishes comprehensive specifications for unplasticized polyvinyl chloride (PVC-U) components utilized in underground drainage and wastewater disposal systems. It
LVS EN 1451-1:2018
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
This technical document outlines the comprehensive specifications for plastic pipe systems based on polypropylene designed for both low and high-temperature applications in building drainage
LVS EN 1519-1:2019
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
This technical document establishes comprehensive specifications for plastic piping systems designed for the conveyance of wastewater within buildings, covering both low-temperature and
LVS EN 1555-1:2025
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
This technical specification outlines the general requirements for polyethylene pipe systems designed for the transportation of gaseous fuels. It establishes fundamental criteria applicable to the
LVS EN 1555-5:2021
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
This document establishes technical requirements and testing procedures for polyethylene pipe systems specifically designed for the conveyance of natural gas. It addresses the suitability of these
LVS CEN/TS 1555-7:2022
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
This technical specification outlines guidelines for the conformity assessment of plastic pipeline systems for gas fuel supply constructed from polyethylene. It addresses the seventh section of a
LVS EN ISO 6412-3:2018
Technical product documentation - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:2017)
This document establishes a unified framework for the graphical representation of terminal components within ventilation and drainage systems in technical product documentation. It provides specific
LVS EN ISO 6412-1:2018
Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017)
This document establishes essential guidelines for the graphical representation of piping systems within technical product documentation. It focuses specifically on simplification techniques designed
LVS EN ISO 6412-2:2018
Technical product documentation - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:2017)
This technical specification addresses the simplification of representation for tubing within engineering documentation. It specifically focuses on isometric projection methods used to depict piping
LVS EN ISO 6708:2001
Pipework components - Definition and selection of DN (nominal size)
This document establishes fundamental definitions and selection criteria concerning the nominal diameter (DN) for piping components. It serves as a technical reference to ensure uniformity in the
LVS EN ISO 9311-2:2011
Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011)
This technical specification outlines a specific procedure for evaluating the shear strength of adhesives utilized within thermosetting piping systems. It serves as the second component within a