ICS 23.040.70
Hoses and hose assemblies
Standards in This Category
EVS-EN ISO 10619-2:2021
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
EVS-EN ISO 1402:2021
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2021)
EVS-EN ISO 7233:2021
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)
EVS-EN 12115:2021
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
EVS-EN ISO 8031:2020
Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020)
LVS EN 560:2018
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
This technical specification establishes the essential requirements for hose assemblies used in gas welding equipment, specifically designed for processes such as welding, cutting, and similar
LVS EN 561:2003
Gas welding equipment - Quick-action coupling with shut- off valves for welding, cutting and allied processes
This document outlines the technical specifications for gas cylinder fittings equipped with quick connections and integrated shut-off valves, specifically designed for use in welding, cutting, and
LVS EN 854:2015
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
This document specifies the technical requirements for fabric-reinforced hydraulic rubber hoses and their accessories. It defines the construction, performance criteria, and dimensions necessary for
LVS EN 853:2015
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
This document specifies the dimensional and performance requirements for steel wire reinforced hydraulic hoses and their associated fittings. The scope encompasses various constructions designed for
LVS EN 1113:2015
Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
This technical specification defines the general requirements for hygiene nodes connected to shower hoses in domestic and similar water supply systems of type 1 and type 2. The document establishes
LVS EN 1112:2008
Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
This specification outlines the general technical requirements for shower outlets associated with Type 1 and Type 2 water supply systems within sanitary engineering installations. It defines the
LVS EN 1360:2013
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
This document outlines the technical requirements for rubber and plastic hoses intended for fuel dispensing systems, along with their associated connector kits. It specifies performance criteria,
LVS EN ISO 1307:2008
Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
This technical specification addresses dimensional characteristics essential for flexible tubing used across various industrial and commercial sectors. It establishes the formal procedures for
LVS EN 1327:2001
Gas welding equipment - Thermoplastic hoses for welding and allied processes
This document specifies technical requirements and test methods for thermal fusion welding equipment used with thermoplastic pipes, along with guidance on associated processes. It covers apparatus
LVS EN ISO 1402:2021
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2021)
This document specifies the methods for conducting hydraulic tests on rubber and plastic hoses and hose assemblies. The primary objective is to verify the strength and integrity of these components
LVS EN ISO 1403:2020
Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2019)
This technical specification outlines the essential requirements and test methods for flexible hoses constructed with fabric-reinforced rubber. The document establishes a comprehensive framework
LVS EN 1765:2016
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
This document establishes comprehensive technical requirements and specifications for rubber hose assemblies designed for the transfer and discharge of petroleum products and related fluids. It
LVS EN 1762:2019
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
This document outlines technical specifications for rubber hoses and their associated fittings designed to convey liquefied petroleum gas in either liquid or gaseous state, as well as natural gas.
LVS EN 1947:2014
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
This document outlines the technical specifications for a specialized semi-rigid pressure hose assembly designed specifically for fire fighting operations involving pumps and vehicles. The content
LVS EN ISO 2398:2024
Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2024)
This document specifies technical requirements for air hoses manufactured from rubber reinforced with textile layers, designed for use with compressed air systems. It outlines criteria for