ICS 23.160
Vacuum technology
Standards in This Category
IRAM 19012-3:1992
IRAM
Vacuum Technology. Vacuum Manometers. Definitions.
IRAM 19013-1:1995
IRAM
Positive displacement vacuum pumps. Operating characteristics. Flow rate determination.
IRAM 19014:1993
IRAM
Vacuum Technology. Clamping-Type Quick Couplings. Dimensions.
SAE AS568F-2026
SAE
Aerospace Size Standard for O-Rings
ISO/TS 20177:2018 en
NEN
Vacuum technology - Vacuum gauges - Procedures to measure and report outgassing rates
ISO 3669:1986 en
NEN
Vacuum technology - Bakable flanges - Dimensions
TCVN 10604-2:2015
TCVN
Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure
This technical specification addresses the performance characteristics of steam vacuum pumps, focusing specifically on the measurement of critical back pressure as outlined in the second part of the
TCVN 10604-1:2015
TCVN
Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
This technical specification establishes the fundamental procedures for evaluating key performance characteristics of vapor vacuum pumps. Specifically, the document focuses on the first part of a
ES 8968:2024
EOS
Standard Test Method For Leakage Testing Of Empty Rigid Containers By Vacuum Method
This document establishes a standardized procedure for evaluating the integrity of empty rigid containers through vacuum-based leak detection. The method provides a systematic approach for
ES 6391-2:2007
EOS
Vapour vacuum pumps – Measurement of performance characteristicsــ Part 2: Measurement of critical backing pressure
This document establishes the technical requirements and test methods for determining critical back pressure in steam vacuum pumps. It serves as the second part of a series dedicated to performance
PKN-ISO/TS 3567:2008
PKN
Vacuum Gauges -- Calibration by Direct Comparison with a Reference Instrument
This technical specification outlines procedures for calibrating vacuum gauges by direct comparison with reference instruments. It establishes a standardized methodology to ensure measurement
KS B ISO 1608-1(2009)
KATS
Vapour vacuum pumps－Measurement of performance characteristics－Part 1：Measurement of volume rate of flow(pumping speed)
This document outlines a technical specification focusing on the measurement of performance characteristics for steam vacuum pumps. It specifically addresses the evaluation of volumetric flow rate,
KS B ISO 1607-1(2009)
KATS
Positive-displacement vacuum pumps－Measurement of performance characteristics－Part 1：Measurement of volume rate of flow(pumping speed)
This document outlines the technical methodology for assessing the performance characteristics of rotary vane vacuum pumps, specifically focusing on the measurement of volumetric flow rate, often
KS B ISO 1608-2(2009)
KATS
Vapour vacuum pumps－Measurement of performance characteristics－Part 2：Measurement of critical backing pressure
This document outlines the technical specifications for measuring the performance characteristics of steam vacuum pumps, specifically focusing on the determination of critical back pressure. It
KS B ISO 1607-2(2009)
KATS
Positive-displacement vacuum pumps－Measurement of performance characteristics－ Part 2：Measurement of ultimate pressure
This document outlines a specific technical standard focused on the evaluation of performance characteristics for positive displacement vacuum pumps. Within this framework, particular attention is
KS B 6382(2010)
KATS
Dimensions of Clmped-type Vacuum Couplings
This technical document specifies the dimensional requirements for the Clmped type vacuum coupling, a critical component used in maintaining vacuum integrity within various industrial systems. The
KS B 6314-2(2012)
KATS
Positive-displacement oil-sealed rotary vacuum pumps－Measurement of volume rate of flow(pumping speed)
This document outlines the prescribed procedures for determining the exhaust speed of oil rotary vacuum pumps. It establishes a standardized framework for evaluating the performance of such pumping
KS B 1540(2012)
KATS
Vacuum flanges
This technical specification outlines the dimensional, structural, and performance requirements for flanges utilized in vacuum apparatus systems. It defines the necessary parameters for flange
KS A 0506(2011)
KATS
Methods of calibration for vacuum gauges
This technical specification outlines the methodologies for calibrating vacuum gauges used across various industrial and scientific applications. It establishes a framework for ensuring measurement
GB/T 21271-2026
GB
Vacuum Technology Vacuum Pump Noise Measurement
This standard provides guidelines for the measurement of noise emitted by vacuum pumps within the field of vacuum technology. It outlines the procedures, equipment requirements, and conditions