ICS 25.160.30
Welding equipment
Standards in This Category
LVS EN ISO 7285:2021
Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995)
This document specifies requirements for the design, testing, and operation of pneumatic cylinders intended for multi-point welding applications. It addresses critical aspects such as structural
LVS EN ISO 7291:2011
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010)
This standard specifies the technical requirements for pressure regulators used in gas welding equipment, including applications for cutting and related processes. It covers regulators designed to
LVS EN ISO 8205:2021
Resistance welding equipment - Water-cooled secondary connection cables(ISO 8205:2021)
This document establishes specific technical requirements and test methods for water-cooled secondary connecting cables utilized in welding equipment. The primary objective is to ensure the
LVS EN ISO 9012:2023
Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2023)
This document specifies the technical requirements and test procedures for portable gas stream welding torches equipped with a gas supply system, designed for use in gas welding applications. It
LVS EN ISO 9090:2020
Gas tightness of equipment for gas welding and allied processes (ISO 9090:2019)
This technical specification addresses the permeability characteristics of equipment utilized in gas welding and allied processes. It establishes the necessary test methods and acceptance criteria to
LVS EN ISO 9312:2013
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013)
This document establishes the technical specifications for a replacement insulation pin designed for use with electrode holders in resistance welding equipment. The requirement ensures that when the
LVS EN ISO 10225:2021
Gas welding equipment - Marking for equipment used for gas welding, cutting and allied processes (ISO 10225:2013)
This national adoption specification establishes uniform requirements for the identification markings applied to gas welding apparatus, cutting equipment, and devices associated with related
LVS EN ISO 10656:2021
Resistance welding equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016, Corrected version 2016-08)
This document establishes technical requirements and specifications for integrated transformers designed specifically for welding guns used in contact welding equipment. The content defines critical
LVS CEN/TS 13259:2023
Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes
This technical specification addresses the design, manufacturing, and performance requirements for manual and mechanical torches employed in gas welding applications, specifically focusing on
LVS EN 13705:2004
Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding)
This document specifies the technical requirements and test methods for equipment used in hot gas welding and extrusion welding processes of thermoplastic materials. It applies to machines designed
LVS EN ISO 14113:2014
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
This document establishes technical specifications for rubber and plastic hoses and hose assemblies designed for industrial gases in welding applications. It specifically addresses equipment used in
LVS EN ISO 14114:2018
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017)
This standard outlines general requirements for acetylene manifold systems associated with welding, cutting, and related processes within the context of fire protection equipment. It addresses the
LVS EN ISO 14744-5:2001
Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy
This document establishes the technical requirements and test procedures for evaluating the leakage precision of electron beam welding machines. It serves as a critical component within a broader
LVS EN ISO 14744-2:2001
Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of ccelerating voltage characteristics
This document outlines the second part of a technical specification dealing with acceptance testing procedures for electron beam welding machines. It specifically focuses on the measurement of
LVS EN ISO 14744-1:2008
Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions
This technical specification establishes the fundamental principles and acceptance conditions for the verification of electron beam welding machines. It defines the essential requirements necessary
LVS EN ISO 14744-3:2001
Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics
This technical document specifies the requirements for acceptance testing of electron beam welding machines, focusing specifically on the measurement and evaluation of beam characteristics. It
LVS EN ISO 14744-6:2001
Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position
This document establishes the requirements and specifications for measuring the point stability of electron beam welding machines during acceptance testing. It provides a standardized methodology to
LVS EN ISO 14744-4:2001
Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed
This document establishes a technical specification for determining welding speed in electron beam welding equipment, serving as the fourth installment in a series dedicated to this specific welding
LVS CEN/TR 15068:2009
Gas welding equipment - Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering - Measurement method
This document provides a standardized method for measuring the emission noise generated by nozzles used in gas welding, cutting, heating, soldering, and tinning equipment. It outlines the specific
LVS EN ISO 15616-2:2003
Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy
This specification outlines the requirements for evaluating the static and dynamic precision of CO2 laser welding and cutting machines under high-quality conditions. It establishes a standardized