ICS 43.040.10
Electrical and electronic equipment
Standards in This Category
LVS EN 50436-6:2015
Alcohol interlocks - Test methods and performance requirements - Part 6: Data security
This document establishes specific testing methodologies and performance criteria for data security within aluminum automatic locking systems. It serves as the sixth part of a comprehensive series
LVS EN 50436-3:2017
Alcohol interlocks - Test methods and performance requirements - Part 3: Guidance for authorities, decision makers, purchasers and users
This document outlines technical guidelines concerning anti-lock braking systems, specifically addressing the third segment of a comprehensive testing framework. It establishes performance criteria
LVS EN 50436-4:2022
Alcohol interlocks - Test methods and performance requirements - Part 4: Connection and digital interface between the alcohol interlock and the vehicle
This document outlines the specific technical requirements and testing methodologies for the integration of alcohol interlock systems with vehicles, focusing particularly on the digital interface
LVS EN IEC 62321-3-3:2022
Determination of certain substances in electrical and electronic products. Part 3-3: Screening for polybrominated biphenyls, polybrominated diphenyl ethers, and phthalates in polymers by gas chromatography-mass spectrometry after pyrolysis or thermal deso
This document outlines a technical specification focused on the analysis of electrical and electronic products. It specifically addresses the screening of hazardous substances within polymeric
SM ISO 25981:2024
Road vehicles. Connectors for electrical connections between towing and towed vehicles. Connectors for charging systems with electronic control system and nominal supply voltage of 12 V or 24 V
This technical specification defines requirements for electrical connectors used to establish the connection between towing vehicles and trailers equipped with electronic control systems.
SM ISO 16750-4:2024
Road Vehicles. Environmental Conditions and Tests for Electrical and Electronic Equipment. Part 4: Climatic Loads
This technical specification defines the environmental stress conditions and corresponding testing procedures specifically for electrical and electronic components within automotive applications. It
SM ISO 10605:2024
Road vehicles. Test methods for electrical disturbances caused by electrostatic discharge
This document establishes a standardized methodology for evaluating electromagnetic interference induced by electrostatic discharge within motor vehicles used for road transport. The procedure
SM ISO 16750-5:2024
Road vehicles. Environmental conditions and tests for electrical and electronic equipment. Part 5: Chemical loads
This document establishes a comprehensive framework for evaluating the resilience of electrical and electronic components utilized within motor vehicles when subjected to various chemical
SM ISO 7638-1:2018
Road vehicles. Connectors for electrical connections between towing vehicles and towed vehicles. Part 1: Connectors for braking systems and running gears of vehicles with a rated supply voltage of 24 V
This specification addresses the technical requirements for electrical connectors used between towing vehicles and their trailers within the road transport sector. Specifically, it focuses on the
SM ISO 7638-2:2018
Road vehicles. Connectors for electrical connections between towing vehicles and towed vehicles. Part 2: Connectors for braking equipment and running gear of vehicles, with a rated supply voltage of 12 V
This standard addresses the technical specifications for electrical interconnections between towed vehicles and their tractor units, specifically focusing on the second part of the series. It defines
SM EN 1648-1:2018
Vehicle for leisure accommodation. Very low voltage electrical installations of 12 V direct current. Part 1: Caravans
This document establishes the technical requirements and test methods for 12-volt direct current electrical installations designed for recreational vehicles intended for leisure use, with a specific
SM EN 1648-2:2018
Vehicle for recreational use. Very low voltage (12 V) direct current electrical systems. Part 2: Motor caravans
This document specifies technical requirements and test methods for the 12-volt direct current low-voltage electrical systems installed in motorhomes and leisure vehicle units designed for
SM ISO 6722-2:2018
Road vehicles. Single-conductor cables of 60 V and 600 V. Part 2: Dimensions, test methods and requirements for cables with aluminium conductors
This standard addresses specific technical requirements for single-conductor cables used in vehicle electrical systems, operating at 60V and 600V levels. Focusing on the second section of a broader
SM EN 62321-6:2017
Determination of certain substances in electrical and electronic equipment. Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)
This technical document establishes a standardized analytical procedure specifically designed for the quantitative determination of certain restricted substances within electrical and electronic
SM EN 50436-6:2017
Anti-start device in the presence of alcohol. Test methods and performance specifications. Part 6: Data security
This technical specification addresses critical aspects of data protection within systems designed to prevent driving under the influence of alcohol. It defines rigorous methodologies for evaluating
SM EN 50436-3:2017
Anti-Start Device in the Presence of Alcohol. Test Methods and Performance Specifications. Part 3: Guide for Authorities, Decision Makers, Buyers and Users
This technical specification outlines comprehensive guidelines for authorities, decision-makers, purchasers, and end-users regarding anti-tamper devices designed to prevent vehicle operation in the
SM ISO 4091:2017
Vehicle Road. Connectors for Electrical Connections Between Towing Vehicles and Trailers. Definitions, Methods, and Requirements
This document establishes the technical specifications for electrical connectors used in the coupling between tractor units and trailers within road transport operations. It defines the required
SM ISO 3731:2017
Road vehicles. Electrical connectors between towing and towed vehicles. Type 24 S 7-pole connector (supplementary) for vehicles with 24 V power supply system
This document specifies technical requirements for electrical connectors designed to link towing vehicles with their trailers within the realm of road transport. Focusing specifically on the 7-pin
SM ISO 3732:2017
Road Vehicles. Electrical Connections between Vehicles that Towing and Trailers. 7-Pole Type 12 S Connector (Supplementary) for Vehicles with 12 V Power Supply System
This document establishes technical specifications for connectors used in the electrical coupling between towing vehicles and their trailers within 12-volt power supply systems. It specifically
SM ISO 7637-2:2016
Vehicle electrical systems. Electrical disturbances by conduction and coupling. Part 2: Transmission of electrical disturbances solely by conduction along power lines
This technical specification addresses the evaluation of electromagnetic compatibility for road vehicles, specifically focusing on disturbances conducted through supply lines. It establishes the