ICS 49.025.01
Materials for aerospace construction in general
Standards in This Category
EVS-EN 4864:2020
Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior
LVS EN 2390:2020
Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0,6 mm ≤ a ≤ 12,5 mm
This document serves as a technical specification within the aerospace sector, specifically addressing the requirements for structural tubes made from aluminum alloy 6082-T6. It establishes precise
LVS EN 2366:2020
Aerospace series - Sheets and strips - Heat resisting alloys - Cold rolled - Thickness a ≤ 3 mm - Dimensions
This standard outlines the specific dimensional requirements for cold-rolled sheet and strip materials composed of heat-resistant alloys, with a focus on products having a thickness not exceeding 3
LVS EN 2369:2019
Aerospace series - Wires, heat resisting alloys - Diameter 0,2 mm ≤ D ≤ 8 mm - Dimensions
This document specifies dimensional requirements for wire made of heat-resistant alloys utilized within the aviation and aerospace sectors. The scope covers wires with diameters ranging from 0.2
LVS EN 2600:2019
Aerospace series - Designation of metallic semi-finished products - Rules
This document establishes a systematic framework for designating metallic semi-finished products within the aviation sector. It defines the nomenclature and classification rules applicable to various
LVS EN 2950:2008
Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects
This document establishes comprehensive guidelines for the macroscopic and microscopic examination of semi-finished products and components fabricated from heat-resistant alloys within the aerospace
LVS EN 3987:2010
Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing
This technical specification establishes a comprehensive methodology for evaluating the cyclic fatigue performance of metallic materials used in aeronautical and aerospace applications under
LVS EN 4262:2013
Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880MPa
This standard establishes the technical requirements and specifications for unprocessed forged components derived from heat-resistant alloys within the aerospace sector. Specifically, it addresses
LVS EN 4263:2013
Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960MPa
This specification outlines the requirements for a heat-resistant nickel-based alloy designated as FE-PA4901, corresponding to the grade X12CrNiCoMoW21-20. The document applies to semi-finished
LVS EN 4376:2016
Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated - Bar and section, De ≤ 200 mm
This document specifies technical requirements and test methods for heat-resistant nickel-chromium-iron alloys with the chemical composition NiCr19Fe19Nb5Mo3, corresponding to material grade 2.4668.
LVS EN 4377:2016
Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D ≤ 300 mm
This standard establishes technical specifications for nickel-chromium-iron-based alloys, specifically designated as NiCr19Fe19Nb5Mo3 and identified by the numerical grade 2.4668. It focuses on
LVS EN 4632-001:2008
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements
This document establishes fundamental guidelines within the aerospace industry concerning welding and brazing processes. It addresses the essential properties of various materials when subjected to
LVS EN 4632-006:2013
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys
This technical specification belongs to a specialized series addressing aerospace manufacturing processes, specifically focusing on the joining technologies for advanced materials. It establishes
LVS EN 4632-005:2010
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 005: Homogeneous assemblies of heat resisting Ni or Co base alloys
This document establishes specific technical requirements and guidelines concerning the weldability and brazing characteristics of homologous joints. It focuses specifically on high-temperature
LVS EN 4632-004:2013
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
This technical specification addresses the welding and brazing characteristics of components fabricated from homogeneous high-alloy steels within the broader aeronautical and aerospace materials
LVS EN 4632-002:2008
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys
This technical specification addresses critical fabrication processes within the aerospace and aviation sectors, specifically focusing on the weldability and brazability of materials. It forms part
LVS EN 4864:2021
Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior
This document specifies test procedures designed to evaluate the durability of interior components within aerospace vehicles under severe dynamic conditions. The methodology addresses resistance to
LVS EN 4867:2019
Aerospace series - Laser surface marking by discoloration
This document establishes technical requirements for a specialized laser surface marking technique used within the aerospace industry, specifically focusing on the method of creating marks through
LVS EN 4861:2021
Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation
This technical specification establishes a structured framework for the metrological assessment of Digital Image Correlation (DIC) systems employed in aerospace applications. It focuses on
LVS EN 6041:2018
Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
This standard establishes a comprehensive framework for the analysis of uncured non-metallic materials utilizing differential scanning calorimetry. It outlines specific procedural requirements to