ICS 49.025.05
Ferrous alloys in general
Standards in This Category
LVS EN 2002-001:2026
Aerospace series - Metallic materials - Test methods - Part 001: Tensile testing at ambient temperature
This technical specification establishes a comprehensive framework for conducting tensile testing on metallic materials at ambient temperature within the aerospace industry. It outlines precise
LVS EN 2002-002:2006
Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature
This technical specification establishes a rigorous methodology for evaluating the mechanical properties of metallic materials used within the aviation and aerospace sectors under elevated
LVS EN 2002-21:2020
Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of castings
This document establishes specific examination procedures for the non-destructive testing of cast metallic components within the aerospace sector, focusing exclusively on radiographic inspection
LVS EN 2032-001:2014
Aerospace series - Metallic materials - Part 001: Conventional designation
This document establishes the conventional symbols used for the identification and marking of various metallic materials within the industrial sector. It serves as a technical reference to ensure
LVS EN 2032-2:2000
Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition
This document outlines a technical specification within the aerospace and aviation sector, specifically addressing metallurgical terminology for metallic materials. It establishes standardized codes
LVS EN 2043:2013
Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)
This document establishes general requirements for the conformity assessment of semi-finished metallic materials within the aerospace industry. It specifically addresses components processed through
LVS EN 2119:2018
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa
This technical specification establishes the comprehensive requirements for a specific grade of heat-resistant steel wire and rivet components utilized within the aerospace sector. The material,
LVS EN 3510:2020
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm
This specification defines the requirements for solid solution and precipitation heat treatment processes applied to bar and profile products made from heat-resistant alloys. The material specified
LVS EN 3639:2026
Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa
This specification defines the technical requirements for wire rod materials intended for the manufacture of forged fasteners used in aerospace applications. The material in question is a
LVS EN 3638:2026
Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets, strips and plates - 0,5 ≤ a ≤ 10 mm
This technical specification addresses the production and processing requirements for aerospace-grade heat-resistant alloys, specifically targeting the X6NiCrTiMoV26-15 grade designated as 1.4980. It
LVS EN 3761:2020
Aerospace series - Heat resisting alloy FE-PA2601 - Softened and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa
This technical specification outlines the requirements for bar materials made from heat-resistant alloys, specifically designated for use in the aerospace sector. The document defines detailed
LVS EN 3762:2023
Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold worked - Wire for forged fasteners - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa
This document establishes technical specifications for stainless steel wire rods designated as X6NiCrTiMnMoV26-15, specifically intended for the production of forged fasteners. The material falls
LVS EN 3873:2011
Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner- Cracked (CC) test pieces
This document establishes a standardized procedure within the aerospace field for evaluating the fatigue crack growth behavior of metallic materials. It specifically outlines the methodology for
LVS EN 3969:2007
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D < 350 mm
This technical specification establishes comprehensive requirements for vacuum melted and annealed bar原材料 made from (40CrMoV12) steel, specifically designed for applications within the aerospace
LVS EN 4050-4:2013
Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria
This technical document outlines the specific acceptance criteria for ultrasonic examination of metallic products, including bars, plates, forgings, and forged billets, within the aerospace sector.
LVS EN 4050-1:2013
Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements
This document establishes the general requirements for non-destructive testing of metallic materials used in aeronautical and aerospace applications, specifically focusing on bars, sheets, profiles,
LVS EN 4050-3:2013
Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks
This technical specification outlines the requirements for reference blocks used in non-destructive testing of metallic materials within the aerospace sector. Specifically, it addresses the
LVS EN 4050-2:2013
Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test
This document outlines specific procedures for conducting ultrasonic testing on metallic materials used in the aviation and aerospace sectors. It focuses particularly on the examination of bars,
LVS EN 4264:2020
Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 - As forged - Forging stock - a or D ≤ 200 mm
This document establishes technical requirements for wrought heat-resistant nickel alloys designated as X4NiCrMoTi43-13 in the wrought condition. It specifically addresses forged billets with a
LVS EN 4268:2013
Aerospace series - Metallic materials - Heat treatment facilities - General requirements
This document establishes the fundamental specifications for heat treatment equipment used within the aviation and aerospace sectors, specifically focusing on metallic materials. It outlines the