ICS 49.025.10
Steels
Standards in This Category
LVS EN 2209:2009
Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1100 MPa - Sheets, strips and plates - 0,5 mm ≤a ≤ 20 mm
This technical specification outlines the requirements for flat-rolled steel products designated as FE-PL1502, equivalent to the material grade 25CrMo4. Applicable to the aviation and aerospace
LVS EN 2205:2009
Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm
This document specifies technical requirements and quality criteria for steel bars designated as 25CrMo4 with a tensile strength range between 900 MPa and 1100 MPa, applicable to diameters up to 40
LVS EN 2221:2018
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm ≤ a ≤ 55 mm
This document specifies the technical requirements for steel products used in aviation and aerospace applications, specifically focusing on seamless tubes and hollow sections. The material must
LVS EN 2226:2014
Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De ≤ 150 mm
This document addresses the technical specifications for steel grades within the aeronautical and aerospace sector, specifically focusing on the 105CrMo17 material designated as 1.4125. It outlines
LVS EN 2157-2:2000
Aerospace series - Steel - Forging stock and forgings - Technical specification - Part 2: Forging stock
This document establishes technical specifications for raw materials used in the production of forged components within the aviation and aerospace sectors. It serves as a critical reference for
LVS EN 2222:2018
Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings
This document outlines technical specifications for steel grades designated as FE-PL31, which undergo quenching and tempering processes suitable for manual and die machining within the aerospace
LVS EN 2278:2015
Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 150 mm
This standard specifies the technical requirements for hot-rolled steel bars made of X12CrNiMoV12-3 alloy, designated by material number 1.4933. The material is primarily intended for applications
LVS EN 2279:2018
Aerospace series - Steel FE-PM37 - 900 MPa ≤ Rm ≤ 1 100 MPa - Forgings - De ≤ 150 mm
This document defines technical requirements for a specific high-strength forging grade used in the aviation and aerospace sectors. The material, designated as FE-PM37 steel, is characterized by an
LVS EN 2280:2018
Aerospace series - Steel FE-PM37 - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheet - a ≤ 6 mm
This document establishes the technical specifications for a high-strength aerospace-grade steel designated as FE-PM37. The material is defined by its tensile strength properties, specifically
LVS EN 2252:2025
Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa
This technical specification addresses the requirements for forged components produced from 15CrMoV6 (1.7334) steel within the aviation and space sectors. It specifically governs products with a
LVS EN 2398:2008
Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - R<(Index)m> <größer => 900 MPa - Bars for machined bolts - D <kleiner => 25 mm
This document establishes comprehensive technical requirements for bar materials intended for the manufacturing of forged bolts with a diameter of 25 millimeters. Specifically designed for aviation
LVS EN 2399:2008
Aerospace series - Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) - Rm ≥ 900 Mpa - Bars for forged bolts - D ≤ 25 mm
This document specifies technical requirements for cold heading wire rods made of heat-resistant steel grade FE-PA2601 (X4NiCrTiMoV26-15), designed for use in aerospace applications. The standard
LVS EN 2461:2009
Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Forgings - De ≤ 70 mm
This technical specification addresses the requirements for forged components manufactured from X12CrNi13 stainless steel within the aviation and aerospace industry. The document establishes the
LVS EN 2469:2007
Aerospace series — Steel FE-PA3901 (X1CrNi18-10) — Air melted — Softened — Wires — 0,4 mm < D < 12,5 mm — 450 MPa < Rm < 650 Mpa
This technical specification addresses the requirements for vacuum melted wires fabricated from X1CrNi18-10 stainless steel within the context of aerospace engineering applications. It defines
LVS EN 2439:2009
Aerospace series - Steel FE-PL2102 (34NiCr6) - 900 MPa ≤ Rm ≤ 1100 MPa - Forgings - De≤ 40 mm
This technical specification defines the requirements for a specific class of high-strength alloy steel designated as FE-PL2102 with a chemical composition corresponding to 34NiCr6. The material is
LVS EN 2438:2009
Aerospace series - 900 MPa <kleiner =>R<(Index)m> <kleiner => 1100 MPa - Bars - D<(Index)e> <kleiner => 40 mm
This technical specification defines material requirements for a specific high-strength steel product used within the aeronautical and aerospace sectors. The document covers the metallurgical
LVS EN 2446:2009
Aerospace series - Steel FE-PL1503 (35CrMo4) - 1100 MPa ≤ Rm ≤ 1300 MPa - Bars - De ≤ 25 mm
This technical specification establishes the requirements for seamless steel bars within the aerospace materials portfolio, specifically addressing grades such as 35CrMo4. The document defines
LVS EN 2460:2009
Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Bars - De ≤ 70 mm
This specification outlines the requirements for round bars made from aerospace-grade stainless steel, specifically the X12CrNi13 alloy, which is suitable for demanding applications in aviation and
LVS EN 2448:2009
Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa <kleiner => R<(Index)m> <kleiner => 1100 MPa - Bars - D<(Index)e> <kleiner => 40 mm
This technical specification establishes comprehensive requirements for the mechanical properties of round steel bars intended for aerospace applications. The document focuses on a specific grade of
LVS EN 2467:2024
Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa
This technical document establishes comprehensive specifications for steel grades designated as X2CrNi18-9, produced via electric furnace melting and delivered in the annealed condition. The material