ICS 49.025.15
Non-ferrous alloys in general
Standards in This Category
LVS EN 2002-16:2020
Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing
This document outlines a specific procedure for non-destructive testing within the aviation sector, focusing on the examination of metallic materials. It addresses the methodology known as penetrant
LVS EN 2078:2002
Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval
This document establishes a comprehensive framework within the aerospace sector for managing metallic materials, specifically addressing the processes of production planning, inspection planning, and
LVS EN 2306:2018
Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars
This document establishes technical specifications for annealed bars made from a specific heat-resistant nickel-based alloy within the aerospace sector. The alloy composition primarily consists of
LVS EN 2302:2023
Aerospace series - Heat-resisting nickel base alloy NiCr20Co3Fe3 - Rm ≥ 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm
This technical specification outlines the requirements for cold-rolled sheets and strips made from heat-resistant nickel-based alloys, specifically designated as NiCr20Co3Fe3. The document
LVS EN 2400:2020
Aerospace series - Heat resisting nickel base alloy NI-P96-HT - Cold drawn and precipitation treated - Wire - D ≤ 10 mm
This technical specification addresses the requirements for cold-drawn and age-hardened wire made of heat-resistant nickel-based alloys, specifically designated as NI-P96-HT, with a maximum diameter
LVS EN 2402:2014
Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D ≤ 10 mm
This document establishes specific technical requirements for annealed wire products made from nickel-chromium cobalt alloy designated as NiCr20Co3Fe3 within the aviation and aerospace sector. The
LVS EN 2732:2005
Aerospace series - Magnesium alloy Mg-C46001-T6 - Chill casting
This technical specification addresses the material properties and processing requirements for magnesium alloy designated as MG-C46001-T6, specifically tailored for cold casting applications within
LVS EN 2731:2005
Aerospace series - Magnesium alloy MG-C46001 - T6 - Sand casting
This technical document establishes the specifications for magnesium alloy T6 sand castings within the aerospace and aviation sector. It outlines the material requirements, testing methods, and
LVS EN 2959:2019
Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners - 3 mm ≤ D ≤ 30 mm
This standard establishes the technical requirements for solid solution treatment and cold working processes applicable to bar materials used in forging fasteners. The material specified is a
LVS EN 3018:2020
Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm
This document outlines technical specifications for cold-drawn wire used in the production of threaded inserts, specifically designed for applications requiring high temperature resistance within the
LVS EN 3671:2007
Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D ≤ 250 mm
This document establishes technical specifications for cast raw materials made from Ni-PH3601 alloy, specifically designated as NiCr22Mo9Nb, within the aviation and aerospace sector. It focuses on
LVS EN 3668:2007
Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D < 250 mm
This document establishes technical specifications for a specific type of nickel-based superalloy, designated as NI-PH2301, which corresponds to the chemical composition NiCr21Fe18Mo9. The material
LVS EN 3844-3:2019
Aerospace series - Flammability of non-metallic materials - Part 3: Small burner test, 45° - Determination of the resistance of material to flame and glow propagation and to flame penetration
This technical specification outlines the procedures for evaluating the flammability of non-metallic materials utilized within the aerospace sector. Specifically, it defines the methodology for the
LVS EN 3844-2:2019
Aerospace series - Flammability of non-metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation
This technical document establishes the specific procedures for evaluating the flammability characteristics of non-metallic materials utilized within the aerospace industry. It focuses on a
LVS EN 3844-1:2019
Aerospace series - Flammability of non-metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation
This document outlines the technical requirements for assessing the flammability characteristics of non-metallic materials specifically within the aerospace sector. The methodology detailed herein
LVS EN 3952:2001
Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire
This document establishes technical requirements for a specific type of silver-based brazing alloy classified as AG-B10001, which corresponds to the chemical composition AgCu28. It is designed for
LVS EN 3947:2000
Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Rolled foil
This document establishes technical specifications for nickel-based braze filler metals designated as NI-B15701, with a composition comprising approximately 34% palladium and 30% gold. The standard
LVS EN 3934:2001
Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil
This technical specification outlines requirements for nickel-based welding filler metals, specifically addressing the NiCr15B4 alloy composition. The document belongs to a broader series concerning
LVS EN 3886:2001
Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2AI) - Filler metal for welding
This technical specification establishes comprehensive requirements for welding wire composed of a nickel-cobalt alloy containing chromium, molybdenum, titanium, and aluminum. Designed specifically
LVS EN 3922:2000
Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil
This document establishes specifications for a specialized braze filler material within the aerospace industry. It focuses on a specific nickel-based alloy designated as NI-B41203, which possesses a