ICS 49.025.20
Aluminium
Standards in This Category
LVS EN 2044:2002
Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm < D < 63 mm - Dimensions
This specification defines the dimensional tolerances for cold-drawn round bars made of aluminum and aluminum alloys within the 4mm to 63mm diameter range. It focuses specifically on the h11
LVS EN 2004-5:2000
Aerospace series - Test methods for aliminium and aluminium alloy products - Part 5: Determination of cladding thickness and copper diffusion of clad semi-finished products
This document establishes a standardized methodology for evaluating coating thickness and copper diffusion in partially machined components made from aluminum and its alloys, specifically within the
LVS EN 2050:2001
Aerospace series - Extruded T-section, in aluminium alloys - Dimensions
This document establishes the dimensional specifications for aluminum alloy T-profiles utilized within the aerospace and aviation sectors. It is part of a comprehensive series dedicated to ensuring
LVS EN 2053:2017
Aerospace series - U-section aluminium alloy folded profiles - Dimensions
This document establishes the technical specifications for aluminum alloy bent U-profiles utilized within the aviation and aerospace industries. It defines precise dimensional requirements, including
LVS EN 2045:2002
Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm < a < 50 mm - Dimensions
This technical specification defines the dimensional tolerances for rectangular bars made from aluminum and its alloys within the Kosmosa series. Specifically, it covers products with a thickness
LVS EN 2049:2001
Aerospace series - Extruded channel section, in aluminium alloys - Dimensions
This technical specification establishes dimensional requirements for extruded aluminum alloy sections with a U-profile geometry, specifically designed for applications within the aerospace industry.
LVS EN 2046:2002
Aerospace series - Hexagonal bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm < a < 50 mm - Dimensions
This specification defines dimensional requirements for coated hexagonal bars manufactured from aluminum and its alloys within the aerospace series. It specifically addresses the tolerance class h 11
LVS EN 2048:2001
Aerospace series - Extruded L-section, in aluminium alloys - Dimensions
This technical specification addresses dimensional requirements for extruded aluminum alloys in the form of T-profiles, specifically designed for the aerospace and aviation sectors. The document
LVS EN 2004-1:2000
Aerospace series - Test methods for aliminium and aluminium alloy products - Part 1: Determination of electrical conductivity of erought aluminium alloys
This document establishes a standardized methodology for determining electrical conductivity specifically within wrought aluminum and aluminum alloy products used in aviation and aerospace
LVS EN 2004-7:2017
Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys
This technical specification outlines essential procedures for evaluating the electrical conductivity of deformable aluminum and aluminum alloy materials. Within the broader framework of aerospace
LVS EN 2047:2001
Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions
This technical specification establishes the dimensional requirements for L-shaped profiles fabricated from aluminum alloys within the aviation industry sector. The document outlines precise
LVS EN 2094:2000
Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgings 3 mm ≤ a ≤ 150 mm
This technical specification addresses the requirements for forged components manufactured from AL-P7009-T74 aluminum alloy within the aerospace and aviation sector. The document establishes precise
LVS EN 2128:2000
Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm ≤ a or D ≤ 75 mm
This document establishes comprehensive technical specifications for drawn aluminum rods designated as AL-P7075-T7351 within the aviation and space industry framework. It specifically addresses
LVS EN 2087:2025
Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheets and strips - 0,4 mm ≤ a ≤ 6 mm
This document establishes comprehensive technical specifications for clad aluminium alloy sheets and strips designated as AL-P2014A in temper T6 or T62. The scope covers material with thicknesses
LVS EN 2076-3:2000
Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 3: Pre-production and production castings
This technical specification establishes comprehensive requirements for the testing and certification of aluminum-magnesium alloy castings within the aerospace sector. It specifically addresses the
LVS EN 2100:2000
Aerospace series - Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D ≤ 200 mm
This document establishes technical specifications for aluminum alloy designated as AL-P2014A-T4511, specifically addressing extruded and rod profiles with diameters or thicknesses not exceeding 200
LVS EN 2076-2:2000
Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 2: Ingots for remelting
This standard establishes technical specifications for aluminium and magnesium alloy billets and castings within the aerospace series. Specifically, the document addresses the requirements for
LVS EN 2086:2005
Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand and die forgings a ≤ 150 mm
This document specifies the technical requirements for manual machining operations involving AL-P2618A-T851 aluminum alloy within the aerospace sector. It is applicable to workpieces where the
LVS EN 2089:2005
Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm
This document establishes technical requirements for aluminum alloy sheets and strips specifically manufactured from AL-P2014A-T6 or T62 grades. The scope covers materials with thicknesses ranging
LVS EN 2126:2000
Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm ≤ a ≤ 80 mm
This technical specification addresses the requirements for flat-rolled aluminium and aluminium alloy products intended for aerospace applications, specifically focusing on the grade designated as