ICS 49.025.50
Adhesives
Standards in This Category
EVS-EN 16602-70-16:2021
Space engineering - Adhesive bonding for spacecraft and launcher applications
LVS EN 2243-3:2006
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core
This standard specifies the test methods for evaluating the peel strength of structural adhesives used in non-metallic materials within the aerospace sector. Specifically, it focuses on the procedure
LVS EN 2243-6:2006
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
This document establishes a specific set of procedures for evaluating the mechanical properties of structural adhesives used in aerospace applications, focusing on non-metallic components. It
LVS EN 2243-2:2006
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
This document outlines a specific methodology within the broader aeronautics and astronautics sector, focusing on the evaluation of structural adhesives made from non-metallic materials. It details
LVS EN 2243-5:2006
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
This document establishes a standardized testing protocol specifically designed for evaluating the aging characteristics of structural adhesives used within the aviation and aerospace sectors. These
LVS EN 2243-1:2006
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear
This technical specification establishes a uniform set of procedures for evaluating the lap shear strength of structural adhesives intended for use in aircraft and spacecraft applications. Developed
LVS EN 2667-2:2018
Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear
This technical document specifies the essential test procedures for evaluating the shear deformation of bonded joints within compressive fittings. It is designed for use in the aviation and aerospace
LVS EN 2667-3:2020
Aerospace series - Non-metallic materials - Foaming structural adhesive films - Test methods - Part 3: Expansion ratio and volatile content
This technical document establishes the standardized procedures for evaluating specific performance characteristics of cellular structure adhesives made from non-metallic materials used in the
LVS EN 2667-6:2002
Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 6: Determination of water absorption
This technical specification outlines a series of standardized procedures designed to evaluate the performance of adhesive products used in the construction of non-metallic materials within the
LVS EN 2781:2000
Aerospace series - Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
This document outlines a specialized testing procedure within the aerospace sector, specifically focusing on non-metallic materials. It establishes a uniform method for determining the thickness of
LVS EN 4106:2013
Aerospace series - Non-metallic materials - Structural adhesive systems - Paste adhesive - Technical specification
This document establishes comprehensive technical specifications for paste-type structural adhesive systems used within the aviation and aerospace industries. Focusing on non-metallic materials, the
LVS EN 4492:2013
Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 19 Nm
This technical document establishes specifications for torque strength performance in thread sealing components derived from non-metallic anaerobic curing compounds. Designed for applications within
LVS EN 4491:2013
Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm
This document outlines technical specifications concerning torque strength for thread sealing components made from anaerobic polymer compounds used within aviation and aerospace sectors. It addresses
LVS EN 4488:2013
Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm
This document outlines technical specifications for thread sealing components within the aerospace industry, specifically focusing on non-metallic materials utilizing anaerobic polymerization
SM EN 3792:2022
Series aerospace. Anaerobic polymerizable adhesives. Technical specification
This document establishes comprehensive technical specifications for anaerobic polymer adhesives used within the aerospace sector. It defines critical performance criteria, testing methodologies, and
SM EN 2667-3:2020
Aerospace series. Non-metallic materials. Expandable film form structural adhesives. Test methods. Part 3: Expansion rate and volatile matter content
This document establishes a specific experimental procedure within the aerospace materials sector, focusing on non-metallic polymers. It addresses the rigorous testing required for adhesive systems
SM EN 4492:2019
Series Aerospace. Non-metallic Materials. Anaerobic Curing Compounds. Threaded Assemblies. Torsional Resistance 19 Nm
This document establishes specific technical requirements for the thread assembly performance of anaerobic cure polymer composite materials used in aerospace applications. It focuses on defining the
SM EN 4488:2019
Aerospace Series. Non-metallic Materials. Anaerobic Curing Compounds. Threaded Assemblies. Torsional Strength 2 Nm
This technical specification defines the test methods and requirements for assessing the torsional strength of threaded connections within non-metallic anaerobic cured polymer composites used in
SM EN 4491:2019
Aerospace series. Non-metallic materials. Anaerobic polymerizable compounds. Threaded assemblies. Torsional strength 16 Nm
This document establishes specific technical requirements for thread assembly testing involving 16 Newton-meter torsional strength, specifically within the context of aerospace series standards for
SM EN 4106:2019
Spatial series. Non-metallic materials. Structural adhesive systems. Paste adhesives. Technical specification
This document establishes comprehensive technical specifications for paste adhesives utilized within structural bonding systems of non-metallic materials in the aerospace industry. Developed to