ICS 55.100
Bottles. Pots. Jars
Standards in This Category
GS 290:2018
Specification for plastic containers for pharmaceutical use other than parenteral and ophthalmic preparations
GS 116:2018
Specification for blow moulded containers of nominal capacities up to 35 Litres
EVS-EN 17827:2023
Glass packaging - Finishes for sparkling wines produced by the traditional method (26 mm, 29 mm, 36 mm)
EVS-EN 17829:2023
Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions
EVS-EN 16592:2022
Packaging - Rigid plastic containers - PET finish 29/25 (12,6)
EVS-EN 16293:2020
Packaging - Glass Packaging - Deep BVS finishes for still wines
EVS-EN ISO 12822:2020
Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020)
LVS EN 76:2003
Packages for certain prepacked foodstuffs - Capacities of glass and metal containers
This standard establishes the fundamental technical requirements and measurement methodologies for determining the nominal capacity of glass and metal containers used in the packaging of food
LVS EN ISO 7458:2004
Glass containers - Internal pressure resistance - Test methods
This technical specification outlines a systematic procedure for evaluating the resistance of glass containers to internal pressure. The method is designed to ensure safety and reliability during the
LVS EN ISO 7459:2004
Glass containers - Thermal shock resistance and thermal shock endurance - Test methods
This document establishes a standardized procedure for evaluating the resistance of glass containers to sudden temperature changes and their long-term durability under such conditions. The
LVS EN ISO 8106:2005
Glass containers - Determination of capacity by gravimetric method - Test method
This document outlines a recognized international procedure for determining the capacity of glass containers using the gravimetric method. The approach relies on precise weighing techniques to ensure
LVS EN ISO 8113:2004
Glass containers - Resistance to vertical load - Test method
This technical specification establishes the fundamental principles and procedures for evaluating the ability of glass containers to withstand vertical compressive forces during handling and
LVS EN ISO 9100-14:2005
Glass containers - Vacuum lug finishes - Part 14: 110 regular
This technical specification addresses the dimensional requirements for glass bottles manufactured using the blow-vacuum molding process, specifically targeting the general dimensions designated as
LVS EN ISO 9100-13:2005
Glass containers - Vacuum lug finishes - Part 13: 100 regular
This technical specification establishes detailed requirements for 100ml cylindrical vacuum bottles utilized in the glass container industry. It serves as the thirteenth part within a comprehensive
LVS EN ISO 9100-7:2005
Glass containers - Vacuum lug finishes - Part 7: 58 deep
This technical document specifies dimensional requirements for molded vacuum necks of glass containers, focusing specifically on a depth measurement of 58 units. It establishes precise parameters to
LVS EN ISO 9100-10:2005
Glass containers - Vacuum lug finishes - Part 10: 77 regular
This technical specification outlines the requirements for vacuum stoppers specifically designed for glass laboratory apparatus, focusing on their neck dimensions. It establishes standardized
LVS EN ISO 9100-4:2006
Glass containers - Vacuum lug finishes - Part 4: 38 medium
This document establishes technical specifications for glass containers manufactured using the vacuum blow-neck method, specifically focusing on the design and dimensional requirements for
LVS EN ISO 9100-12:2005
Glass containers - Vacuum lug finishes - Part 12: 89 regular
This document specifies the requirements for the neck finish of glass containers manufactured using the vacuum forming process, focusing specifically on the 89 metric specification. It outlines the
LVS EN ISO 9100-6:2005
Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular
This document outlines specific technical requirements for the manufacturing of drawneck vacuum stoppers designed for glass containers. It focuses exclusively on two conventional dimensional
LVS EN ISO 9100-11:2005
Glass containers - Vacuum lug finishes - Part 11: 82 regular
This technical specification addresses the requirements for vacuum tubes used in volumetric glassware, specifically focusing on the eleventh section which defines nominal dimensions. It establishes a