ICS 59.120.20
Winding machines and equipment
Standards in This Category
SM ISO 96-2:2014
Textile machinery and accessories. Rings and shuttles for ring spinning and ring twisting machines. Part 2: "HZ" and "J" rings and their shuttles
This specification establishes technical requirements and testing methods for steel rings and traveler rings specifically designed for spindle ring spinning frames and twisting machines used in the
SM ISO 8116-2:2014
Machines and accessories for the textile industry. Rolls for winding. Part 2: Warp rolls
This document establishes technical specifications and requirements for beam-type spools utilized in the winding processes within the textile industry. It specifically addresses the second part of a
SM SR ISO 8116-8:2013
Machinery and accessories for the textile industry. Winding rolls. Part 8: Definition of run-out tolerances and measurement methods
This technical document establishes the precise methodology for defining and measuring runout tolerances on spindles specifically designed for winding operations in textile machinery. It addresses
SM SR ISO 8489-1:2013
Machinery and accessories for the textile industry. Conical tubes for cross-winding. Part 1: Recommended principal dimensions
This technical specification addresses the dimensions and specifications for conical tubes utilized in cross-wound textile machinery and their associated components. The document establishes
SM SR ISO 5238-2:2013
Textile machinery and accessories. Winding of textile yarns and semifinished products. Part 2: Types of winding
This technical specification addresses the classification of winding configurations used in textile machinery and auxiliary equipment for yarn and semi-finished products. It establishes a systematic
SM SR ISO 8116-7:2013
Machinery and accessories for the textile industry. Winding drums. Part 7: Drums for dyeing fibres and yarns
This document establishes technical specifications for reels used in winding operations within the textile industry, with a specific focus on those designed for dyeing fiber and yarn. It defines the
SM SR ISO 8489-3:2013
Machines and accessories for the textile industry. Conical tubes for cross winding. Part 3: Dimensions, tolerances, and marking of tubes with a semi-angle at the apex of 4º 20'
This specification addresses technical requirements for conical tubes utilized in cross-winding applications within textile machinery. It specifically defines dimensional tolerances and marking
SM SR ISO 3914-7:2013
Textile Industry Machinery. Cylindrical Tubes. Part 7: Dimensions, Tolerances and Marking of Perforated Tubes for Dyeing
This technical specification outlines the requirements for cylindrical tubes utilized in textile machinery, specifically focusing on those designed for dyeing applications involving perforated
SM SR ISO 3914-4:2013
Textile Machinery. Cylindrical Tubes. Part 4: Dimensions, Tolerances, and Designation of Tubes for Textured Yarns (Stretch)
This technical specification addresses components within the textile machinery industry, specifically focusing on cylindrical tubes utilized in the process of deformation spinning, also known as
SM SR ISO 3914-5:2013
Textile industry machinery. Cylindrical tubes. Part 5: Dimensions, tolerances and marking of tubes for continuous synthetic spinning yarns for spinning machines
This technical specification addresses the dimensional requirements, allowable tolerances, and associated marking conventions for conical yarn packages utilized in continuous synthetic spinning
SM SR ISO 8116-9:2013
Machines and accessories for the textile industry. Winding rolls. Part 9: Dyeing rolls for fabrics
This document establishes technical specifications for winding devices utilized within the textile manufacturing sector, specifically addressing the ninth section focused on fabric dyeing drums. It
SM SR ISO 8489-2:2013
Textile industry machinery and accessories. Cross-winding conical tubes - Part 2: Dimensions, tolerances and designation of tubes with a half-angle at the apex of 3º 30'
This document specifies the dimensional requirements, tolerances, and labeling conventions for conical tubes used in cross-winding applications within the textile machinery sector. Focusing on the
SM SR ISO 3914-2:2013
Textile Industry Machinery. Cylindrical Tubes. Part 2: Dimensions, Tolerances and Designation of Tubes for Machines for Spinning Open-End Fibres
This document establishes technical specifications for cylindrical spindles used in textile machinery, specifically addressing the second segment of a broader series. It defines precise dimensional
SM SR ISO 3914-6:2013
Textile industry machinery. Cylindrical tubes. Part 6: Dimensions, tolerances, and designation of tubes for cross-winding and twisting
This specification establishes comprehensive requirements for cylindrical packages utilized in the textile industry, focusing specifically on dimensional parameters and tolerances. It addresses
SM SR ISO 10458:2013
Textile Industry Machinery. Square Bars for Winding, Used in Dyeing and Finishing Machines. Dimensions
This document specifies dimensional requirements for square winding tubes employed within textile machinery dedicated to dyeing and finishing processes. It outlines precise measurements and
SM SR ISO 8489-4:2013
Textile machinery and accessories. Conical tubes for cross-winding. Part 4: Dimensions, tolerances, and notation of tubes with a semi-vertex angle of 4°20′ for dyeing winding
This standard specifies the dimensional requirements, tolerances, and marking conventions for dyed winding tubes with a top angle half-angle of 4°20′, designed for use as cone tubes in cross-winding
SM SR ISO 8489-5:2013
Textile machinery and accessories. Conical tubes for cross-winding. Part 5: Dimensions, tolerances and marking of tubes with semi-cone angle of 5º 57'
This technical document establishes precise specifications for conical tubes utilized in cross-winding machines within the textile sector. The scope focuses specifically on the fifth segment of the
SM SR ISO 3914-1:2013
Textile Industry Machinery. Cylindrical Tubes. Part 1: Recommended Main Dimensions
This document establishes recommended major dimensions for cylindrical tubes utilized within the textile industry machinery sector. The standard provides a comprehensive set of specifications
SM SR ISO 3914-3:2013
Textile Industry Machinery. Cylindrical Tubes. Part 3: Dimensions, Tolerances, and Designation of Tubes for Textile Healds
This document specifies technical requirements for cylindrical tubes used in textile machinery, focusing on the third part of a broader series. It defines precise dimensional specifications and
SM SR ISO 344:2013
Textile Industry Machinery. Spinning Machinery. Mules for Flax
This document establishes essential technical specifications for a range of critical machinery within the textile manufacturing sector. It provides detailed guidelines for the design, construction,