ICS 77.140.20
Stainless steels
Standards in This Category
LVS EN ISO 683-17:2023
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2023)
This technical document establishes the technical requirements and specifications for steel grades specifically designated for rolling bearings. It covers various metallurgical categories, including
LVS EN ISO 7153-1:2017
Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016)
This document establishes technical specifications concerning the materials used in surgical instruments, specifically focusing on metallic components. It outlines the required properties and
LVS EN ISO 9444-2:2010
Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009)
This technical specification establishes tolerance requirements for dimensions and shapes of hot-rolled stainless steel plates and sheets intended for continuous feed processing. Specifically, it
LVS EN ISO 9445-2:2010
Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)
This standard establishes the requirements for dimensional and shape tolerances applicable to continuously cold-rolled stainless steel products, specifically focusing on wide flat steel and sheets or
LVS EN ISO 9445-1:2010
Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)
This document specifies dimensional and shape tolerances for continuously cold-rolled stainless steel products, specifically addressing narrow strips and flat steels. It outlines precise requirements
LVS EN 10088-4:2009
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
This document establishes comprehensive technical conditions for the supply of stainless steel products, specifically addressing non-alloy steel sheets, plates, and flats intended for construction
LVS EN 10088-3:2024
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes
This technical specification establishes the delivery requirements for stainless steel semi-finished products, bars, wires, sections, and bright products. It defines the general corrosion resistance
LVS EN 10088-5:2009
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
This document establishes the technical conditions for the supply of corrosion-resistant steel products specifically designed for construction applications. It covers a range of items including
LVS EN 10088-2:2025
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resistant steels for general purposes
This technical specification outlines the general supply requirements and technical conditions for stainless steel sheets, strips, and coil products intended for general use. It establishes the
LVS EN 10088-1:2024
Stainless steels - Part 1: List of stainless steels
This document establishes a standardized classification system specifically designed for corrosion-resistant steel grades. It defines the nomenclature and identification codes for various types of
LVS EN 10253-3:2009
Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
This document establishes technical specifications for welded steel pipe fittings manufactured from cold-headed austenitic stainless steel and austenite-ferrite (duplex) steel. The scope specifically
LVS EN 10264-4:2012
Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
This document establishes technical specifications for stainless steel wires intended for the manufacture of steel strands and steel strand products. It defines the chemical composition requirements,
LVS EN 10250-3:2022
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
This document outlines the specific requirements for alloy special steel produced using open mold processes. It serves as a technical specification within a broader series addressing common technical
LVS EN 10283:2019
Corrosion resistant steel castings
This standard specifies requirements for the design, manufacturing, inspection, and acceptance of steel castings intended for corrosion-resistant applications. It outlines the technical criteria for
SM EN 10088-1:2024
Stainless steels. Part 1: List of stainless steels
This technical document establishes a comprehensive classification system specifically designed for stainless steel products. It serves as a fundamental reference by providing an authoritative
SM CWA 18011:2023
Guidelines for evaluating fracture toughness under plane stress of high strength advanced steel plates in fracture mechanics
This technical specification establishes a standardized framework for evaluating plane stress fracture toughness in high-strength advanced steel plates, relying on the principles of fracture
SM CWA 18012:2023
Test method for determining the crack resistance index for high strength steel sheets
This technical specification outlines a standardized procedure for evaluating the resistance of high-strength steel strips to crack propagation. The document provides a detailed methodological
SM EN ISO 683-3:2022
Steels for thermal treatment, alloy steels and free-machining steels. Part 3: Carburizing steels
This document establishes the technical specifications for steel materials utilized in heat treatment processes, with a specific focus on carburizing steels. It serves as a specialized segment within
SM EN ISO 683-5:2021
Heat-treated steels, alloy steels, and automatic steels. Part 5: Nitrided steels
This technical document establishes specific requirements for nitriding steels, which represent a specialized subset of heat-treated steels, alloy steels, and automatic machining steels. Focused on
SM CR 10320:2019
Optical emission analysis of low alloy steels (routine method). Method for the determination of C, Si, S, P, Mn, Cr, Ni and Cu content
This document outlines a standardized analytical procedure for determining the concentration of key alloying elements in steel materials using emission spectroscopy under routine operating