ICS 77.140.60
Steel bars and rods
Standards in This Category
SM EN 10278:2024
Dimensions and tolerances of cold-formed stainless steel and other special steel products
This document establishes a comprehensive framework for the dimensional accuracy and allowable tolerances of cold-rolled products manufactured from stainless steel and other special alloys. The scope
SM EN ISO 9443:2019
Standard quality class for the surface of hot-rolled semi-finished bars and wires
This technical specification outlines the classification criteria for surface quality levels applicable to hot-rolled bars and wires used as semi-finished products in the steel industry. It
SM EN 10058:2019
Hot-rolled flat steel and wide steel bars for general purposes. Dimensions and tolerances on dimensions and shape
This technical specification addresses the dimensional requirements and tolerances for flat rolled steel products intended for general applications. It specifically covers hot-rolled扁钢 and wide扁钢
SM EN 10263-1:2018
Bare, laminated wires and steel wires for cold forming and cold extrusion. Part 1: General delivery technical conditions
This technical specification establishes the general requirements for the delivery of bare wires, drawing wires, and cold drawn and cold extruded wires. The document defines the fundamental criteria
SM EN 10263-5:2018
Bare, laminated wires and steel wires for cold deformation and cold extrusion. Part 5: Technical delivery conditions for stainless steels
This technical specification addresses the supply conditions for stainless steel products specifically designed for cold working and cold extrusion processes. It focuses on uncoated cold-rolled wire
SM EN 10263-3:2018
Bare, laminated wires and steel wires for cold deformation and cold extrusion. Part 3: Technical conditions of delivery of steels intended for carburising
This technical specification establishes the delivery requirements for uncoated, rolled wire rods and cold-drawn cold-rolled wires specifically designed for carburizing steel applications. The
SM EN 10263-2:2018
Wire for cold drawing and cold extrusion. Part 2: Delivery conditions for steels not intended for heat treatment after cold working
This document outlines the technical supply conditions for cold-processed steels without subsequent heat treatment, specifically addressing naked steel wires, drawing wire, and wire intended for cold
SM EN 10263-4:2018
Bare, laminated wires and steel wires for cold deformation and cold extrusion. Part 4: Technical delivery conditions for quenching and tempering steels
This specification outlines the technical delivery requirements for wire made of quenched and tempered steel, intended for applications such as cold drawing, cold forming, and cold extrusion. It
SM EN ISO 16120-4:2017
Unalloyed steel wire rod for manufacturing wire. Part 4: Requirements for wire rod for special applications
This technical specification establishes requirements for semi-finished wire rod products intended for wire manufacturing, with a specific focus on special applications. Developed within the
SM EN ISO 16120-1:2017
Steel wire rod for the manufacture of wire. Part 1: General requirements
This technical specification establishes the fundamental requirements for unfinished wire rods made of unalloyed steel, specifically designed for the wire drawing process. It outlines essential
SM EN ISO 16120-2:2017
Semi-finished steel product for wire manufacturing. Part 2: Specific requirements for general purpose semi-finished wire
This document specifies technical requirements and test methods for semi-finished wires made of unalloyed steel, intended for general-purpose applications. It addresses characteristics such as
SM EN 10273:2017
Bare laminate produced from weldable steel for pressure apparatus with specified characteristics at high temperatures
This technical document outlines the requirements and specifications for welded steel bare clad plates intended for use in pressure equipment operating under high-temperature conditions. It
SM EN 10272:2017
Stainless steel sheets for pressure vessels
This specification outlines the technical requirements for stainless steel plates intended for the manufacture of pressure vessels. It covers the classification, dimensions, mass, and allowable
SM EN ISO 16120-3:2016
Semifinished unalloyed steel wire rod for wire manufacturing. Part 3: Specific requirements for semifinished wire rod of non-killed or semi-killed low carbon steel
This standard establishes specific technical requirements for unalloyed steel semi-finished wire rod products intended for wire drawing processes. It focuses particularly on carbon镇静 steel or
SM EN 10067:2015
Hot-rolled bulb-flange steel. Dimensions, shape tolerances, dimensional tolerances, and mass tolerances
This technical specification defines the permissible variations in geometry and mass for hot-rolled curved edge steel products. It establishes clear parameters for shape tolerances and dimensional
SM EN 10059:2015
Oţel pătrat laminat la cald pentru utilizări generale. Dimensiuni şi toleranţe la dimensiuni şi la formă
This document establishes the dimensional specifications and allowable tolerances for square cross-section steel bars produced by hot rolling, intended for general engineering and structural
SM EN 10061:2015
Hot-rolled hexagonal laminated steel for general applications. Dimensions, tolerances on dimensions and on shape
This document outlines the specifications for hot-rolled hexagonal steel intended for general applications. It establishes precise requirements regarding the physical dimensions of the material,
SM EN 10060:2015
Hot-rolled round steel for general use. Dimensions and tolerances on dimensions and form
This document establishes the dimensional specifications and form tolerances for hot-rolled round steel intended for general purposes. It defines the allowable variations in diameter, length,
SM EN 10308:2014
Non-destructive Testing. Ultrasonic Testing of Steel Bars
This document outlines the technical requirements and guidelines for performing ultrasonic testing on steel bars as a non-destructive examination method. It establishes the procedures for equipment
SM SR EN 10080:2014
Steel for Reinforcing Concrete. Weldable Steel for Reinforced Concrete. Generalities
This technical specification outlines the general principles applicable to steel for reinforcement in concrete structures. It establishes the fundamental requirements and characteristics necessary to