ICS 79.060.10
Plywood
Standards in This Category
LVS EN 313-2:2000
Plywood - Classification and terminology - Part 2: Terminology
LVS EN 314-2:2000
Plywood - Bonding quality - Part 2: Requirements
LVS EN 314-1:2005
Plywood - Bonding quality - Part 1: Test methods
LVS EN 313-1:2000
Plywood - Classification and terminology - Part 1: Classification
LVS EN 315:2000
Plywood - Tolerances for dimensions
LVS EN 635-3:2002
Plywood - Classification by surface appearance - Part 3: Softwood
LVS EN 635-2:2002
Plywood - Classification by surface appearance - Part 2: Hardwood
LVS EN 635-5:2002
Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects
LVS EN 635-1:2002
Plywood - Classification by surface appearance - Part 1: General
LVS CEN/TS 635-4:2007
Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline
LVS EN 636+A1:2015
Plywood - Specifications
LVS CEN/TS 1099:2007
Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes
This document provides guidelines for assessing the suitability of plywood across various service classes based on its biological durability. It outlines methods to evaluate how plywood performs
LVS EN 1084:2002
Plywood - Formaldehyde release classes determined by the gas analysis method
This technical document establishes a standardized method for determining the formaldehyde emission levels in plywood products. It specifies the use of gas analysis techniques to measure the
LVS EN 12369-2:2025
Wood-based panels - Characteristic values for structural design - Part 2: Plywood
This specification defines structural characteristic values for plywood specifically tailored for architectural applications, focusing on the second part of a comprehensive series. It establishes
LVS EN 14272:2012
Plywood - Calculation method for some mechanical properties
This document outlines the specific test methods employed to evaluate certain mechanical properties of plywood products. It establishes a standardized procedure for assessing how plywood performs
LVS EN 16351:2021
Timber structures - Cross laminated timber - Requirements
This technical specification establishes comprehensive requirements for glued laminated timber used in structural applications within the Baltic region. The document outlines essential criteria for
SM EN 16351:2021
Wooden structures. Laminated timber with orthogonal lamellas. Requirements
This technical specification establishes comprehensive requirements for cross-laminated timber products used in structural applications. It defines the essential physical and mechanical properties
SM CEN/TS 635-4:2019
Placaj. Classification according to face appearance. Part 4: Availability parameters at finishing, guide
This technical specification outlines guidelines for classifying the appearance of board surfaces, with a specific focus on the fourth part addressing parameters related to end-use suitability. It
SM CEN/TS 1099:2019
Adhesives. Biological durability. Guide for assessing adhesives used in different hazard classes
This document outlines the assessment guidelines for the biological durability of plywood when utilized across various hazard classes. It serves as a technical reference for evaluating the resistance
SM EN 636+A1:2016
Decision of the National Institute for Standardization No. 223 of 19.09.2016
This technical specification outlines the requirements for the safe use of personal protective equipment designed for protection against cold environments. The document establishes essential