ICS 83.040.10
Latex and raw rubber
Standards in This Category
nsBAS ISO 9026:2026
ISBIH
Raw rubber or unvulcanized compounds — Determination of green strength
LVS ISO 21461:2012
Rubber Determination of the aromaticity of oil in vulcanized rubber compounds
This specification outlines the methodology for quantifying aromatic hydrocarbons within oil-extended vulcanized rubber compounds. The procedure involves specific preparation steps for test specimens
SM ISO 2453:2025
Raw butadiene-styrene rubber, polymerized in emulsion. Determination of bound styrene content. Refractive index method
This document outlines a technical specification designed to determine the combined styrene content in non-emulsion polymerized styrene-butadiene rubber using the refractive index method. The
SM ISO 1656:2025
Raw natural rubber and natural rubber latex. Determination of nitrogen content
This document outlines the technical methodology for determining nitrogen content within unvulcanized natural rubber and natural rubber latex. It establishes a standardized procedure applicable to
SM ISO 125:2025
Latex natural rubber concentrate. Determination of alkalinity
This document specifies the procedure for determining the alkalinity of natural concentrated rubber latex. The method is applicable to samples intended for industrial processing and quality control
SM ISO 705:2025
Latex rubber. Determination of density between 5 °C and 40 °C
This technical document establishes a standardized procedure for determining the density of latex rubber within a specific temperature range of 5 to 40 degrees Celsius. It provides detailed
SM ISO 976:2025
Rubber and plastics. Polymer dispersions and rubber latex. Determination of pH
This document establishes a standardized methodology for determining the pH value of polymer dispersions and rubber latices. The procedure specifies the necessary equipment, such as calibrated pH
SM ISO 7781:2024
Raw butadiene-styrene rubber. Determination of soap and organic acid content
This technical specification outlines the analytical methods for determining the content of soap and organic acids within unsulfurized styrene-butadiene rubber. The procedure establishes a
SM ISO 248-1:2024
Raw rubber. Determination of volatile matter content. Part 1: Hot pressing method and steam method
This technical specification outlines the methodologies for determining the content of volatile matter within natural rubber. It establishes two distinct approaches: the heat-press method and the
SM ISO 248-2:2024
Raw Rubber. Determination of Volatile Matter Content. Part 2: Thermogravimetric Methods Using an Automatic Analyzer with an Infrared Drying Device
This document outlines the technical specifications for determining the volatile matter content in natural rubber, specifically focusing on the second part of the methodology. The approach described
SM ISO 1795:2024
Raw rubber, natural and synthetic. Sampling and subsequent preparation methods
This document establishes the comprehensive procedures for sampling and subsequent handling of both natural and synthetic raw rubber. It provides detailed guidance on obtaining representative samples
SM ISO 3136:2024
Latex of rubber. Butadiene-styrene rubber. Determination of the bound styrene content
This specification establishes a standardized procedure for determining the combined styrene content in Styrene-Butadiene Rubber (SBR) utilized within rubber products. It outlines the specific
SM ISO 127:2024
Natural Latex Concentrate. Determination of KOH Number
This document specifies the methodology for determining the potassium hydroxide number in natural concentrated rubber. The procedure outlined herein establishes a standardized analytical approach
SM ISO 2005:2022
Latex of Natural Rubber Concentrated. Determination of Sediment Content
This document establishes a standardized methodology for quantifying the mud content within concentrated natural latex. The procedure outlines specific sampling techniques, preparation methods, and
SM ISO 506:2022
Latex of concentrated natural rubber. Determination of volatile fatty acid index
This document establishes a precise analytical method for assessing volatile fatty acid content within concentrated natural latex rubber. The procedure outlines specific experimental steps to
SM ISO 2004:2022
Concentrated natural rubber latex. Coagulated or cream types, stabilized with ammonia. Specifications
This specification outlines the technical requirements for concentrated natural rubber latex stabilized with ammonia, specifically addressing centrifugal or mixed processing methods. The document
SM ISO 2027:2017
Natural Latex Rubber, Concentrated, Vaporized, Stabilized. Specification
This technical specification defines the essential characteristics and requirements for natural concentrated steam-stabilized latex. It outlines the parameters necessary for determining the quality
SM ISO 35:2014
Concentrated natural rubber latex. Determination of mechanical stability
This document establishes the standardized procedures for evaluating the mechanical stability of concentrated natural rubber latex. It outlines specific test methods designed to determine the ability
SM ISO 124:2014
Latex rubber. Determination of total solid content
This document establishes a standardized method for evaluating the total solid material content within latex rubber samples. It outlines the specific procedures required to measure and quantify
SM ISO 126:2014
Latex of natural rubber, concentrated. Determination of dry rubber content
This document outlines the specific procedures for determining the dry rubber content within concentrated natural latex. The methodology detailed herein provides a systematic approach for analyzing