ICS 83.040.30
Auxiliary materials and additives for plastics
Standards in This Category
LVS EN ISO 1043-3:2017
Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
This standard outlines the standardized symbols and abbreviations specifically dedicated to plasticizers used within the field of plastics. It serves as a critical reference for ensuring clear and
LVS EN ISO 7327:2001
Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride
This document establishes a standardized analytical method for determining the content of free acids within acid anhydrides used as curing agents and accelerators in the epoxy resin system. The
LVS EN 12877-3:2001
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test
This document establishes a standardized method for evaluating the thermal stability of materials used in the coloring of plastics, specifically during processing operations. It focuses on the
LVS EN 12877-1:2001
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction
This technical specification outlines a systematic approach for evaluating the color stability of pigments during the processing of plastic coloring materials. It provides general guidance on the
LVS EN 12877-4:2001
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling
This technical specification outlines a standardized procedure for evaluating the heat resistance of color additives used in plastics during their processing. It specifically addresses the assessment
LVS EN 12877-2:2001
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding
This document outlines the specific methodology for evaluating the thermal stability of plastic color materials during their processing stages. The focus lies on the second part of a broader series,
LVS EN 14469-4:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials
This document establishes a specific method for evaluating the migration behavior of colorants within plasticized polyvinyl chloride products containing pigments and extenders. It serves as a
LVS EN 14469-1:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures
This document establishes the standardized procedures for determining the composition and preparation of basic mixtures used in the evaluation of colorants within plasticized polyvinyl chloride
LVS EN 14469-2:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens
This technical specification outlines the procedures for preparing test samples in the context of coloring materials used within plasticized polyvinyl chloride compounds. It serves as a critical
LVS EN 14469-3:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments
This technical specification establishes a standardized procedure for determining the relative tinting strength of white pigments within plasticized polyvinyl chloride materials. The method focuses
LVS CEN/TS 14577:2004
Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons
This technical specification outlines a standardized procedure for analyzing food contact materials and articles made of plastic, specifically focusing on polymer additives. The method described is
T/SXJP 012-2022
TUANTI
Coal tar-based conductive carbon black
This document establishes a set of technical requirements and testing methods for carbon black derived from coal tar, specifically designed for conductive applications. It defines the classification
SM EN 12877-4:2018
Plastic colouring materials. Determination of colour stability to heat during processing of plastic colouring materials. Part 4: Determination by calendering on rollers
This standard establishes a specific test method for evaluating the color heat stability of coloring materials during the processing of plastics. It focuses on the assessment technique utilizing
SM EN 12877-3:2018
Plastics colouring materials. Determination of colour stability to heat during processing of colouring materials in plastics. Part 3: Determination by oven testing
This technical document outlines a specific test procedure designed to evaluate the thermal stability of coloring materials during the processing of plastics. The method focuses on the third part of
SM EN 12877-1:2018
Materiales for colouring plastics — Determination of colour stability of the colouring materials in plastics during processing of the plastic material — Part 1: General introduction
This technical specification establishes a comprehensive framework for evaluating the thermal stability of colorants during the processing of plastic materials. It serves as an essential reference
SM EN 14469-3:2018
Pigments and Filling Materials. Testing of Coloring Materials in Plasticized Polyvinyl Chloride (PVC-P). Part 3: Determination of Relative Tinting Strength of White Pigments
This document outlines a technical specification developed to evaluate the coloring power of white pigments within polyvinyl chloride materials containing pigments and fillers. It specifically
SM EN 12877-2:2018
Colouring materials for plastics. Determination of colour stability at heat during processing of colouring materials for plastics. Part 2: Determination by injection moulding
This technical specification establishes a standardized methodology for evaluating the thermal stability of color in plastic coloring materials during the processing phase. Specifically, it focuses
SM EN 14469-2:2018
Pigments and Fillers: Testing of Coloring Materials in Plasticized Polyvinyl Chloride (PVC-P). Part 2: Preparation of Test Specimens
This document outlines specific procedures for preparing test specimens within the context of testing colored materials for soft polyvinyl chloride using pigments and fillers. It serves as a
SM EN 14469-4:2018
Colouring agents and filling materials. Test of colouring materials in plasticised polyvinyl chloride (PVC-P). Part 4: Determination of the bleeding of colouring materials
This document establishes a standardized test method for evaluating the migration of colorants within plasticized polyvinyl chloride materials, which are commonly utilized in various industrial and
SM EN 14469-1:2018
Plastic Pigments and Filler Materials. Test Method for Coloring Materials in Plasticized Polyvinyl Chloride (PVC-P). Part 1: Composition and Preparation of Base Mixtures
This technical document establishes a foundational framework for the preparation and composition of coloring formulations specifically designed for polyvinyl chloride plastics. It outlines essential