ICS 91.010.30
Technical aspects
Standards in This Category
LVS 190-11:2009
Bridge inspection and load testing
This document establishes comprehensive guidelines for the systematic inspection and load testing of bridge structures. It outlines specific procedures to evaluate the structural integrity and safety
LVS CEN/TS 1090-201:2024
Execution of steel structures and aluminium structures - Reuse of structural steel
The document under discussion represents a technical specification addressing the fabrication processes for steel and aluminium structures, with a specific focus on the reuse of steel elements.
LVS EN 1337-8:2008
Structural bearings - Part 8: Guide Bearings and Restraint Bearings
This technical specification establishes essential requirements and test methods for connection components used in structural applications, specifically focusing on systems designed for guiding and
LVS EN 1337-6:2019
Structural bearings - Part 6: Rocker bearings
This technical specification outlines the requirements and testing procedures for suspended support systems specifically designed within building construction contexts. The document addresses the
LVS EN 1337-7:2019
Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
This technical specification establishes the comprehensive requirements and test methods for spherical and cylindrical supports made of polytetrafluoroethylene, designed specifically for use in
LVS EN 1337-2:2019
Structural bearings - Part 2: Sliding elements
This document establishes technical specifications for structural fasteners used in construction, specifically focusing on the second part dedicated to sliding components. These elements are
LVS EN 1337-4:2004
Structural bearings - Part 4: Roller bearings
This document establishes comprehensive technical specifications for the design, manufacture, and testing of rolling bearings used in building construction applications. It focuses specifically on
LVS EN 1337-7:2004
Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
This document establishes technical specifications for structural bearings utilized in civil engineering applications, specifically focusing on spherical and cylindrical designs incorporating
LVS EN 1337-5:2019
Structural bearings - Part 5: Pot bearings
This document establishes specific requirements and guidelines related to the construction of cup-shaped foundations within building components. It focuses on defining the technical specifications
LVS EN 1337-8:2019
Structural bearings - Part 8: Guide Bearings and Restraint Bearings
This technical document serves as the eighth component of a comprehensive framework addressing building hardware, specifically focusing on elements subjected to constrained or restricted motion. It
LVS EN 1337-2:2004
Structural bearings - Part 2: Sliding elements
This document outlines technical specifications for sliding components utilized within building elements. It defines essential requirements aimed at ensuring the functionality, safety, and durability
LVS EN 1337-10:2004
Structural bearings - Part 10: Inspection and maintenance
This document establishes essential guidelines for the examination and oversight procedures concerning fundamental building components. It outlines systematic approaches to verify compliance with
LVS EN 1337-6:2004
Structural bearings - Part 6: Rocker bearings
This document establishes specific technical requirements and test methods for a particular type of balancing component used in building elements. It focuses on the design, dimensions, and
LVS EN 1337-5:2005
Structural bearings - Part 5: Pot bearings
This technical specification defines the requirements and test methods for cup-shaped bearings used in structural applications. It focuses on components that transfer loads between building elements
LVS EN 1542:2000
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
This document establishes a standardized method for evaluating the tensile strength of adhesive bonds within concrete structures, specifically focusing on their protection and repair systems. The
LVS EN 1993-1-10:2026
Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
This document establishes comprehensive requirements and guidelines specifically focused on the structural design of steel components. It addresses critical material properties necessary for ensuring
LVS EN 1991-2:2024
Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges and other civil engineering works
This document addresses the actions of traffic on bridges and other civil engineering works as part of a comprehensive series concerning loads on structures. It provides detailed methodologies for
LVS CEN/TS 1993-1-101:2023
Eurocode 3: Design of steel structures - Part 1-101: Alternative interaction method for members in bending and compression
This technical specification establishes alternative calculation methodologies for designing steel structures subject to combined axial compression and bending moments. It addresses specific aspects
LVS EN 1991-1-5:2026
Eurocode 1 - Actions on structures - Part 1-5: Thermal actions
This technical specification defines the methods for determining thermal actions and their effects on various types of building structures and civil engineering works. It provides comprehensive
LVS EN 1993-1-7:2026
Eurocode 3 - Design of steel structures - Part 1-7: Plate assemblies with elements under transverse loads
This technical document establishes comprehensive guidelines for the structural design of steel components specifically utilizing shear panels. It is part of a broader series focusing on European