ICS 91.100.99
Other construction materials
Standards in This Category
LVS EN 1937:2001
Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures
This document outlines a harmonized testing protocol designed for evaluating the performance of hydraulic consolidation mortars and/or cementitious grouts. The primary focus is on establishing a
LVS EN 12603:2003
Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
This standard establishes a structured methodology for analyzing mechanical strength data specifically for glass products utilized in building construction. It addresses the statistical challenges
LVS EN 12706:2001
Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics
This document outlines the testing procedures for evaluating the flow characteristics of hydraulic floor leveling compounds and/or self-leveling mortars. It establishes specific methodologies to
LVS EN 13409:2003
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time
This document outlines a specific testing methodology designed for the evaluation of leveling or polishing materials that utilize hydraulic curing mechanisms. The primary focus of this procedure is
LVS EN 13408:2003
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength
This document outlines a standardized procedure for evaluating the bonding strength of hydraulic curing agents used in leveling and smoothing materials applied to floors. It provides detailed
LVS EN 13872:2004
Methods of test for smoothing and/or levelling compounds - Determination of dimensional change
This document specifies the test methods for measuring dimensional changes in materials used for floor levelling and smoothing. It establishes a standardized procedure to evaluate how these products
LVS EN 16566:2014
Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards
This technical specification addresses the requirements and test methods for fillers used in paints and varnishes within civil and building engineering applications. It focuses on ensuring that these
SM EN 1937:2017
Testing methods for finish or levelling screeds with hydraulic bonding. Preparation of mixtures
This standard establishes a unified procedural framework for preparing test mixes used to evaluate hydraulic connections for facing and/or leveling materials. The document specifies precise
SM EN 16566:2017
Primers and paints. Intermediate paints for interior and/or exterior work. Adapting intermediate paints to European standards
This technical document specifies the requirements and test methods for intermediate coatings of paint systems used indoors or outdoors. The scope encompasses both single-component and
SM EN 12706:2015
Adezivi. Testing methods for hydraulic-set finishing and/or levelling mortars. Determination of flow characteristics
This document specifies the procedures for determining the flow characteristics of mortars used for internal and external wall plastering. The scope covers both air-hardening and hydraulic-setting
SM EN 13408:2015
Test method for hydraulic setting finishing and/or leveling mortars. Determination of bond strength
This document outlines the standardized procedure for determining the adhesive strength of mortars possessing hydraulic setting properties. It is specifically designed to be applied to both
SM EN 13409:2015
Testing method for hydraulic setting finish and/or leveling mortars. Determination of setting time
This document outlines a standardized procedure for assessing the setting time of mortar materials utilized for rendering and levelling purposes, specifically those incorporating hydraulic binding
SM EN 13579:2015
Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation
This document outlines a standardized test method designed to evaluate the water-repellent performance of products and systems used for the protection and repair of concrete structures. The procedure
SM SR EN 13872:2011
Testing method for finishing and/or leveling mortars. Determination of concentration
This document outlines the procedural framework for determining concentration through testing methodologies applicable to rendering mortars and/or plastering mortars. The scope covers specific
SM GOST R EN 1850-1:2010
Roof waterproofing membranes — Determination of visible defects — Part 1: Bituminous membranes for waterproofing of roofs
This technical document establishes the essential methodologies for assessing visible defects within flexible waterproofing membranes designed for roof applications. Specifically focused on
SM GOST R EN 1850-2:2010
Foil flexibility for waterproofing - Determination of surface defects - Part 2: Waterproofing sheets of plastic and rubber materials for roofing
This document outlines specific technical requirements for identifying defects within flexible waterproofing materials. It focuses specifically on the inspection methodologies applicable to plastic
SM GOST R EN 1107-1:2010
Flexible for waterproofing. Part 1: Bituminous sheets for waterproofing of roofs. Determination of dimensional stability
This technical specification outlines the methodology for determining the dimensional stability of bitumen-based waterproofing sheets specifically designed for roof applications. It serves as a
SM GOST R EN 1848-1:2010
Bituminous waterproofing sheets. Determination of length, width, and straightness. Part 1: Bituminous waterproofing sheets for roofing
This technical specification outlines the procedures for measuring the length, width, and straightness of bitumen-based waterproofing membranes intended for roofing applications. It defines the
SM GOST R EN 13416:2010
Flexible Waterproofing. Bituminous, Plastic and Rubber Waterproofing for Roofs. Sampling Rules
This document outlines specific procedural guidelines for the collection of representative samples used in the evaluation of flexible waterproofing systems. It focuses on materials designed for
SM GOST R EN 12039:2010
Flexible sheets for waterproofing. Bituminous sheets for roof waterproofing. Determination of granule adhesion
This technical document establishes a standardized procedure for evaluating the adhesion of granules on flexible roofing membranes. It focuses specifically on materials designed for waterproofing