ICS 91.190
Building accessories
Standards in This Category
LVS EN 1303:2015
Building hardware - Cylinders for locks - Requirements and test methods
This specification establishes the comprehensive requirements and testing methodologies for locks and lock cylinders intended for use in equipment accessories. It defines the technical criteria that
LVS EN 1527+A1:2022
Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
This technical specification addresses the essential requirements and associated testing procedures for hardware systems specifically designed for sliding doors and folding doors within the realm of
LVS EN 1670:2007
Building hardware - Corrosion resistance - Requirements and test methods
This standard specifies the general requirements and corresponding test methods for evaluating the corrosion resistance of architectural hardware. It is designed to ensure the durability and
LVS EN 1906:2012
Building hardware - Lever handles and knob furniture - Requirements and test methods
This document specifies the requirements and test methods for handles designed for doors, focusing on rotational or push-type mechanisms. It establishes criteria to ensure the performance,
LVS EN 1935:2003
Building hardware - Single-axis hinges - Requirements and test methods
This document outlines the technical requirements and test procedures for single-axis hinges used in building hardware. It specifies the mechanical performance criteria necessary to ensure
LVS EN 12046-1:2020
Operating forces - Test method - Part 1: Windows
This document outlines a specific technical specification addressing the measurement of operational forces associated with window components. The scope of this standard focuses on Part 1, which
LVS EN 12209:2024
Building hardware - Mechanically operated locks and locking plates - Characteristics and test methods
This document specifies the technical characteristics and testing procedures for mechanical visible locks and fixed plates used within building service systems. It establishes the necessary
LVS EN 12320:2022
Building hardware - Padlocks and padlock fittings - Requirements and test methods
This document establishes the technical requirements and corresponding test methods for locks, padlocks, and their accessories. It defines specific performance criteria that these security devices
LVS EN 13126-4:2022
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 4: Espagnolettes
This technical specification defines the essential requirements and corresponding test methods for handles used in door and window hardware systems. Designed to ensure safety and functionality within
LVS EN 13126-12:2026
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 12: Side hung projecting reversible hardware
This document establishes the technical specifications and corresponding test methods specifically designed for hardware systems used in outward-opening and reversible side-hung fenestration
LVS EN 13126-19:2026
Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 19: Sliding closing devices
This technical document establishes specific requirements and corresponding test methods for sliding closing devices used in building hardware, particularly within door and window systems. It defines
LVS EN 13126-1:2022
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware
This technical specification establishes essential requirements and testing methodologies for hardware components utilized in window systems, with a specific focus on their performance in high-rise
LVS EN 13126-2:2021
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 2: Window fastener handles
This document outlines the technical requirements and test methods specifically designed for door and window handles within the scope of architectural hardware. It establishes precise criteria to
LVS EN 13126-8:2018
Building hardware - Hardware for windows and door height windows - Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware
This technical specification establishes the essential requirements and corresponding test procedures for hardware components designed for doors and windows within the construction sector. It
LVS EN 13126-15:2019
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 15: Rollers for horizontal sliding and hardware for sliding folding windows
This specification establishes the essential requirements and testing procedures for a specialized component within the broader category of window and door hardware systems. Specifically, it
LVS EN 13126-3:2023
Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt and Turn, Tilt-First and Turn-Only hardware
This document specifies the requirements and test methods for window and door fittings, specifically focusing on handles intended for various operational mechanisms. It addresses hardware designed
LVS EN 13126-13:2022
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 13: Sash balances
This document establishes the technical specifications and examination procedures for hardware components used in doors and windows, with a specific focus on sliding window balancing systems. It
LVS EN 13126-14:2022
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 14: Sash fasteners
This standard establishes comprehensive technical requirements and test methods specifically for accessories used in sliding windows. It addresses various components essential for the functionality,
LVS EN 13126-7:2021
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 7: Finger catches
This document establishes specific technical requirements and test methods for security lock bolts, a critical category of hardware fittings used in doors and windows. It addresses the performance
LVS EN 13126-11:2026
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 11: Top hung projecting reversible hardware
This document outlines the technical specifications and testing methodologies specifically designed for hardware components used on outward opening top-hung windows. It serves as a normative