ICS 93.080.10
Road construction
Standards in This Category
LVS EN 13036-4:2012
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
This technical document establishes a standardized procedure for evaluating the surface friction characteristics of roads and airport pavements. Specifically, it outlines the methodology for
LVS EN 13036-8:2025
Road and airfield surface characteristics - Test methods - Part 8: Determination of transverse unevenness and crossfall indices
This technical specification outlines a specific methodology for evaluating surface characteristics on roads and airport pavements. It focuses exclusively on the determination of transverse and
LVS EN 13036-5:2020
Road and airfield surface characteristics - Test methods - Part 5: Determination of longitudinal unevenness indices
This standard defines a specific procedure for evaluating the longitudinal profile characteristics of road and airport pavements, focusing on the measurement of the International Roughness Index. The
LVS EN 13036-6:2008
Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges
This standard establishes a comprehensive set of methods for evaluating surface characteristics of roads and airport pavements. It specifically addresses the measurement of flatness and
LVS EN 13020:2016
Road surface treatment machines - Safety requirements
This document establishes comprehensive safety requirements for machinery specifically designed for surface treatment of roads. It addresses the technical specifications intended to minimize risks
LVS EN 13862:2022
Floor cutting-off machines - Safety
This document establishes safety requirements specifically designed for machinery used in the processing of wood. It addresses the hazards associated with the operation, maintenance, and cleaning of
LVS CEN/TS 15209:2022
Tactile paving surface indicators produced from concrete, clay and stone
This technical specification addresses the design and implementation of tactile paving surfaces intended to assist visually impaired pedestrians. It specifically focuses on materials derived from
LVS EN 16165:2022
Determination of slip resistance of pedestrian surfaces - Methods of evaluation
This document establishes a systematic approach for evaluating the skid resistance of pedestrian pavement surfaces. The methodology outlines specific procedures for measuring the friction coefficient
SM CWA 18175:2025
X Technologies Combined with a Modular Robotic Platform for Road Maintenance Operations
This technical specification establishes a comprehensive framework for integrating extended reality technologies with modular robotic platforms within the domain of road maintenance operations. By
SM CWA 18176:2025
Decision Support System for Highway Maintenance Planning
This document establishes a structured framework for developing and implementing maintenance strategies specifically tailored to high-speed road networks. It outlines essential methodologies for
SM ISO 8608:2022
Mechanical Vibrations. Profiles of Road Surfaces. Presentation of Measurement Results
This document establishes a standardized framework for presenting measurement outcomes derived from road surface profiles concerning mechanical vibrations. It focuses specifically on the
SM EN 13862:2022
Adopted by Decision No. 45 of 01.04.2022 of the Standardization Institute of Moldova
This document outlines technical specifications for the safety and performance evaluation of protective equipment, specifically addressing requirements for industrial safety gear used in occupational
SM EN 16165:2022
Determination of the slip resistance of pedestrian surfaces. Evaluation methods
This document establishes a standardized methodology for evaluating the slip resistance of pedestrian surfaces. It defines specific procedures and technical criteria designed to assess the level of
SM EN 13020:2016
Standard: Road surface treatment machinery. Safety requirements
This document establishes comprehensive safety requirements specifically designed for machinery used in road surfacing and maintenance operations. It addresses various types of equipment employed to
SM EN 536:2015
Machinery for road construction. Mixers for road construction materials. Safety requirements
This document specifies the fundamental safety requirements applicable to stationary and mobile equipment designed for the production of asphalt concrete and other road construction materials. The
SM EN 500-4:2014
Mobile road construction machinery. Safety. Part 4: Specific requirements for compactors
This document outlines specific safety requirements for mobile machinery used in road construction, with a particular focus on compaction equipment. It establishes essential safety criteria and
SM ASTM E2583:2014
Standard Test Method for Measuring Deformations Using a Lightweight Deflectometer (LWD)
This document establishes a standardized procedure for evaluating the performance of lightweight deflectometers. It outlines specific protocols to ensure that measurements of ground deformation are
SM SR EN 13036-6:2013
Characteristics of Road and Airport Pavements. Test Methods. Part 6: Measurement of Longitudinal and Transverse Profiles in the Wavelength Range of Smoothness and Macrotexture
This document establishes a comprehensive methodology for evaluating the longitudinal and transverse profiles of road and airport runway surfaces, specifically focusing on measurements within the
SM SR EN 500-1+A1:2011
Mobile machinery for road construction. Safety. Part 1: General requirements
This technical specification addresses the safety requirements for mobile machinery utilized in road construction. Specifically, it outlines the fundamental general requirements necessary to ensure
SM SR EN 13862+A1:2011
Decision of the National Institute for Standardization and Metrology no. 620-ST of 23.06.2011
This technical specification outlines safety requirements and test methods for safety shoes and safety boots intended for professional use. The document establishes classification criteria based on