US-SAE
Society of Automotive Engineers (SAE) Standards
Browse all standards published by Society of Automotive Engineers (SAE).
Standards by Society of Automotive Engineers (SAE)
SAE AS4383F-2026
SAE
FITTING ASSEMBLY, REDUCER RING LOCKED PORT CONNECTION TO BEAM SEAL, 5000 PSI /8/
This technical specification establishes the requirements for assembling kits designed to lock ring mechanisms at ports where they connect to beam seals, operating under a pressure rating of 5000
SAE AS9885C-2026
SAE
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S41800, 140 KSI MIN, .1900-32 UNJF-3A
This technical specification defines precise requirements for bolts featuring a dual-hexagon extension washer head design, intended specifically for machine applications. The document establishes
SAE J3101-4-2026
SAE
Side Channel and Fault Injection Attack Resistance
SAE AS5169E-2026
SAE
FITTING, PORT PLUG AND BLEEDER
This document establishes comprehensive specifications for auxiliary components, including plugs and caps used in fluid and gas systems within aerospace applications. It defines the design criteria,
SAE J2039-2026
SAE
Side Turn Signal Lamp for Long Vehicles
SAE AMS2759/7F-2026
SAE
Carburizing and Heat Treatment of Carburizing Grade Steel Parts
SAE AS27645D-2026
SAE
BEARING, BALL, AIRFRAME, ANTI-FRICTION, SELF-ALIGNING, LIGHT AND HEAVY DUTY
This technical specification establishes comprehensive requirements for precision ball bearings utilized within aircraft structural frameworks. Designed to accommodate both light and heavy load
SAE AS5972J-2026
SAE
FITTING ASSEMBLY, TEE AXIALLY SWAGED, HYDRAULIC, 5080 PSI
This technical specification outlines the design, manufacturing, and testing requirements for axial reduced fittings used in hydraulic component assembly within aerospace and related high-pressure
SAE J2842-2026
SAE
Design Criteria and Certification for OEM Mobile Air Conditioning Evaporator and Service Replacements
This technical specification establishes comprehensive guidelines for the design and certification of mobile air conditioning evaporators. It addresses requirements applicable to components intended
SAE AMS4998G-2026
SAE
Titanium Alloy Powder, 6Al - 4V
SAE AS1895/24-2026
SAE
COUPLING, V-RETAINER, SINGLE LATCH, TYPE I STANDARD PROFILE 6.50 TO 7.50 DIAMETER
This document establishes the technical specifications for a single snap V-groove retainer coupling belonging to Type I standard profile, designed for nominal outer diameters ranging from 6.50 to
SAE AMS4115L-2026
SAE
Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash-Welded Rings, Annealed, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O)
This specification covers the requirements for annealed aluminum alloy products in the form of bar, rod, wire, and flash-welded rings. The specific alloy composition designated for these materials is
SAE AIR1059G-2026
SAE
Oxygen Cylinder Quality, Serviceability, Maintenance Transfilling, and Marking
This document establishes comprehensive technical guidelines governing the quality assessment, fitness for service, maintenance protocols, refilling procedures, and marking requirements for oxygen
SAE AS3148C-2026
SAE
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .2500-28 UNJF-3A
This document establishes comprehensive technical requirements for a specific class of mechanical fasteners, namely machine bolts featuring a double hexagon extended pad head. Designed for
SAE AS3177C-2026
SAE
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .3750-24 UNJF-3A
This specification defines the requirements for a specific type of fastener assembly featuring a machine bolt with a double hexagonal extended washer head and a drill slot. The product is
SAE ARP5293B-2026
SAE
Safety Considerations for Lasers Projected in the Navigable Airspace
SAE AMS4955K-2026
SAE
Titanium Alloy, Welding Wire, 8Al - 1Mo - 1V
SAE AMS6425G-2026
SAE
Steel, Bars, Forgings, Mechanical Tubing, and Forging Stock, 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) (HY-TUF), Premium Aircraft-Quality, Consumable Electrode Vacuum Melted
SAE AS1895/25-2026
SAE
COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE 6.50 TO 7.50 DIAMETER
This technical specification defines the dimensional and performance requirements for coupling mechanisms, V-shaped supports, and dual-lock fastening systems designed for aerospace applications. The
SAE AMS4476B-2026
SAE