es-aenor
Asociación Española de Normalización (AENOR) Standards
Browse all standards published by Asociación Española de Normalización (AENOR).
Standards by Asociación Española de Normalización (AENOR)
UNE-EN 13763-11:2025
AENOR
Explosives for civil uses - Detonators and detonating cord relays - Part 11: Verification of resistance to damage by dropping of detonators, detonating cord relays and surface connectors (Endorsed by Asociación Española de Normalización in January of 2...
This standard outlines procedures for verifying the drop resistance of detonating tube detonators, detonating tube relays, and surface connectors. It specifies test conditions and criteria to assess
UNE-EN 13630-7:2025
AENOR
Explosives for civil uses - Detonating cords and safety fuses - Part 7: Verification of reliability of initiation of detonating cords (Endorsed by Asociación Española de Normalización in January of 2026.)
This standard outlines the procedures for verifying the ignition reliability of detonation cords, which are essential components in civil explosive applications. It specifies the requirements and
UNE-EN ISO 19630:2025
AENOR
Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature (ISO 19630:2025) (Endorsed by Asociación Española de Normalización in January ...
This standard outlines procedures for determining the tensile properties of fibers used as reinforcement materials in technical ceramics under normal temperature conditions. It provides detailed
UNE-EN ISO 13433:2025
AENOR
Geosynthetics - Determination of dynamic perforation (cone drop test) (ISO 13433:2025)
This standard outlines the methodology for conducting dynamic puncture tests on geosynthetic materials using a cone free-fall apparatus. It provides detailed procedures for preparing test specimens,
UNE-EN ISO 17633:2025
AENOR
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2025)
This standard provides specifications for welding consumables used in arc welding of stainless steel and heat-resistant steel, with or without gas protection. It includes requirements for welding
UNE-EN 13763-16:2025
AENOR
Explosives for civil uses - Detonators and detonating cord relays - Part 16: Verification of delay time accuracy of electric and non-electric detonators, surface connectors and detonating cord relays (Endorsed by Asociación Española de Normalización in...
This standard provides procedures for verifying the accuracy of delay times in electric and non-electric initiators, surface connectors, and detonation cord relays used in civil explosives. It
UNE-EN 4700-006:2025
AENOR
Aerospace series - Steel and heat-resisting alloys for wrought products - Technical specification - Part 006: Pre-production and production forgings (Endorsed by Asociación Española de Normalización in January of 2026.)
This standard specifies the technical specifications for heat-resistant steels and alloys used in the aerospace industry, specifically for forged components. It covers the requirements for standard
UNE-EN 4287:2025
AENOR
Aerospace series - Aluminium alloy AL-P7010 - Forging stock (Endorsed by Asociación Española de Normalización in January of 2026.)
This standard specifies the requirements for aluminum alloy AL-P7010 forged products used in aerospace materials. It covers the chemical composition, mechanical properties, and testing methods
UNE-EN 13763-21:2025
AENOR
Explosives for civil uses - Detonators and detonating cord relays - Part 21: Verification of flash-over voltage of electric detonators (Endorsed by Asociación Española de Normalización in January of 2026.)
This standard outlines the procedures for verifying the discharge voltage of electric initiators used in civil explosives, specifically focusing on detonating cord initiators and relays. It provides
UNE-EN 13630-3:2025
AENOR
Explosives for civil uses - Detonating cords and safety fuses - Part 3: Verification of insensitiveness to friction of the core of detonating cords (Endorsed by Asociación Española de Normalización in January of 2026.)
This standard outlines the procedures for verifying the insensitivity of the core of initiation cords to friction, as specified in the third part of a series related to civil explosives. It provides
UNE-EN 13630-10:2025
AENOR
Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of the index of initiating capability of detonating cords (Endorsed by Asociación Española de Normalización in January of 2026.)
This standard outlines the procedures for determining the detonation capability index of initiation cords used in civil explosives. It specifically addresses the methods required to assess the
UNE-EN ISO 25178-601:2025
AENOR
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO 25178-601:2025)
This standard provides specifications for the design and characteristics of contact-type instruments used to measure surface topography. It focuses on the requirements for instruments equipped with a
UNE-EN ISO 20768:2022/A1:2025
AENOR
Vapour products - Routine analytical vaping machine - Definitions and standard conditions - Amendment 1: Correction of puff profile requirements (ISO 20768:2018/Amd 1:2025)
This standard provides definitions and standardized conditions for the use of electronic vapor generators in the routine analysis of electronic vapor products. It includes revisions to the
UNE-EN 4700-004:2025
AENOR
Aerospace series - Steel and heat-resisting alloys for wrought products for technical specification - Part 004: Wires (Endorsed by Asociación Española de Normalización in January of 2026.)
This standard specifies the technical specifications for heat-resistant steel and alloy materials used in forged components, specifically focusing on wire products. It outlines the requirements for
UNE-EN 3638:2025
AENOR
Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets, strips and plates - 0,5
This standard specifies the requirements for the thermal barrier coating of X6NiCrTiMoV26-15 (1.4980) alloy through electrode remelting, solid solution and precipitation treatment, and the production
UNE-EN 17867:2024+A1:2025
AENOR
Petrol fuel for small internal combustion engines - Requirements and test methods
This standard establishes the requirements and test methods for fuel used in small power internal combustion engines. It provides specifications for the composition and properties of the fuel,
UNE-EN 13763-27:2025
AENOR
Explosives for civil uses - Detonators and detonating cord relays - Part 27: Test methods for electronic initiation systems (Endorsed by Asociación Española de Normalización in January of 2026.)
This standard provides specific testing methods for electronic initiation systems used in civilian explosive devices such as detonation cord initiators and relays. It outlines procedures to ensure
UNE-EN 13763-5:2025
AENOR
Explosives for civil uses - Detonators and detonating cord relays - Part 5: Verification of resistance to cutting damage of leading wires and shock tubes (Endorsed by Asociación Española de Normalización in January of 2026.)
This standard specifies the procedures for verifying the shear resistance of wires and impact tubes used in detonation initiators and relays for civil explosives. It outlines the methods and criteria
UNE-EN 13631-13:2025
AENOR
Explosives for civil uses - Explosives for blasting, boosters and explosive substances - Part 13: Verification of density (Endorsed by Asociación Española de Normalización in January of 2026.)
This standard provides guidelines for the verification of density in civil explosives, including detonators, enhancing agents, and explosive substances. It outlines procedures and requirements to
UNE-EN 13763-12:2025
AENOR
Explosives for civil uses - Detonators and detonating cord relays - Part 12: Verification of resistance to hydrostatic pressure of detonators, detonating cord relays and surface connectors (Endorsed by Asociación Española de Normalización in January of...
This standard outlines the procedures for verifying the water pressure resistance of detonators, fuse relays, and surface connectors used in civil explosives. It specifies the testing methods and