hu-mszt

Magyar Szabványügyi Testület Standards

Browse all standards published by Magyar Szabványügyi Testület.

Standards by Magyar Szabványügyi Testület

MSZ EN 15466-2:2024
MSZT

Primers for cold and hot applied joint sealants. Part 2: Determination of resistance against alkali

2024-07-01
MSZ EN 10088-3:2024
MSZT

Stainless steels. Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes

2024-06-01
MSZ EN 12201-2:2024
MSZT

Plastics piping systems for water supply, and for drains and sewers under pressure. Polyethylene (PE). Part 2: Pipes

2024-06-01
MSZ IEC/TS 60079-46:2024
MSZT

Explosive atmospheres. Part 46: Equipment assemblies

2024-07-01
MSZ EN 10088-1:2024
MSZT

Stainless steels. Part 1: List of stainless steels

2024-06-01
MSZ ISO/IEC 42001:2024
MSZT

Information technology. Artificial intelligence. Management system

2024-07-01
MSZ EN 10305-3:2024
MSZT

Steel tubes for precision applications. Technical delivery conditions. Part 3: Welded cold sized tubes

2024-06-01
MSZ EN 10264-3:2024
MSZT

Steel wire and wire products. Steel wire for ropes. Part 3: Round and shaped non alloyed steel wire for high duty applications

2024-06-01
MSZ IEC/TS 60079-48:2024
MSZT

Explosive atmospheres. Part 48: Portable or Personal Electronic Equipment. Guide for the use of equipment without a certificate for use in Hazardous Areas

2024-07-01
MSZ EN 15466-1:2024
MSZT

Primers for cold and hot applied joint sealants. Part 1: Determination of homogeneity

2024-07-01
MSZ IEC/TS 60079-40:2024
MSZT

Explosive atmospheres. Part 40: Requirements for process sealing between flammable process fluids and electrical systems

2024-07-01
MSZ EN 13282-3:2024
MSZT

Hydraulic road binders. Part 3: Assessment and verification of constancy of performance

2024-07-01
MSZ EN ISO 4351:2024
MSZT

Geometrical product specifications (GPS). Association (ISO 4351:2023)

2024-06-01
MSZ CEN/TR 18043:2024
MSZT

Construction products: Assessment of release of dangerous substances. Pros and cons of methods for communicating the potential release of dangerous substances into soil, groundwater or surface water and indoor air

2024-07-01
MSZ EN ISO 8256:2024
MSZT

Plastics. Determination of tensile-impact strength (ISO 8256:2023)

2024-06-01
MSZ EN ISO 22007-4:2024
MSZT

Plastics. Determination of thermal conductivity and thermal diffusivity. Part 4: Light flash method (ISO 22007-4:2024)

2024-06-01
MSZ EN 12255-12:2024
MSZT

Wastewater treatment plants. Part 12: Control and automation

2024-07-01
MSZ EN 13863-6:2024
MSZT

Concrete pavements. Part 6: Test method for the determination of the tensile strength of concrete on cylindrical discs

2024-07-01
MSZ IEC/TS 60079-42:2024
MSZT

Explosive atmospheres. Part 42: Electrical safety devices for the control of potential ignition sources from Ex-Equipment

2024-07-01
MSZ EN 12201-5:2024
MSZT

Plastics piping systems for water supply, and for drains and sewers under pressure. Polyethylene (PE). Part 5: Fitness for purpose of the system

2024-06-01