1Key Takeaways
This chapter of GB 13140.1-2008 is replaced by the following content: This part of GB 13140 applies to twist-on connection devices for connecting two or more untreated hard and/or soft copper wires (abbreviated as TOCD, the same below) ), the connected wires should meet the requirements of GB/T 3956-1997, the cross-sec…
2Scope / Description
This chapter of GB 13140.1-2008 is replaced by the following content: This part of GB 13140 applies to twist-on connection devices for connecting two or more untreated hard and/or soft copper wires (abbreviated as TOCD, the same below) ), the connected wires should meet the requirements of GB/T 3956-1997, the cross-sectional area of the wires is from 0.5㎜ to 16㎜ (including 16㎜), and the sum of the cross-sectional areas should not exceed 35㎜. The TOCDs in this section are applicable to low-voltage circuits for household and similar purposes, the voltage of which shall not exceed 1000V (ac) and 1500V (dc). The TOCDs in this standard are designed to be operated primarily by hand, but certain TOCDs, for example those with large connecting wire cross-sectional areas, may require the use of special tools.
5Citation Network
Referenced by GB 13140.5-2008
GB 13140.1-2008
6Frequently Asked Questions
What is GB 13140.5-2008?
GB 13140.5-2008 — Connecting devices for low-voltage circuits for household and similar purposes.Part 2:Particular requirements for twist-on connecting devices is an international standard developed by General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China. This chapter of GB 13140.1-2008 is replaced by the following content: This part of GB 13140 applies to twist-on connection devices for connecting two or more untreated hard and/or soft copper wires (abbreviated as TOCD, the same below) ), the...
What does GB 13140.5-2008 cover?
This standard covers: This chapter of GB 13140.1-2008 is replaced by the following content: This part of GB 13140 applies to twist-on connection devices for connecting two or more untreated hard and/or soft copper wires (abbreviated as TOCD, the same below) ), the connected wires should meet the requirements of GB/T...
Who should use this standard?
This standard is intended for organizations, professionals, and stakeholders involved in various industries and sectors. It is applicable to manufacturers, service providers, regulatory bodies, and certification organizations.
What is the latest version of GB 13140.5-2008?
The current published version is GB 13140.5-2008, published on 2008-12-30. Always check for amendments or pending revisions.
How do I purchase GB 13140.5-2008?
You can purchase GB 13140.5-2008 by visiting our contact page. Click "Get This Standard" to view pricing and send a purchase inquiry. Our team will respond with payment and delivery details.