Fixed capacitors for use in electronic equipment.Part 19-1:Blank detail specification.Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c.capacitors.Assessment level EZ

2Scope / Description

Blank detail specification A blank detail specification is a supplementary document to a sectional specification and includes requirements for format, layout and minimum content of the detail specification. A detailed specification that does not comply with these requirements is not considered to be a specification that complies with the requirements of the IEC, nor can it be called an IEC specification. The content of sub-specification 1.4 should be considered when formulating detailed specifications. Fill in the following corresponding content in the position indicated by the number in parentheses on the first page: Identification of the detailed specification (1) Organization authorized to draft this detailed specification: IEC or national standards body. (2) Detailed specification numbers, publication dates of IEC and national standards and more as required by the national system. (3) General specification number and version number of IEC and national standards. (4) IEC blank detail specification number. Identification of capacitors: (5) A brief description of the type of capacitor. (6) A brief description of the typical structure (when applicable). When capacitors are not designed for use on printed wiring boards, this position in the detail specification should be clearly stated. (7) Outline drawings of main dimensions that have a significant impact on interchangeability, and/or references to national and international documents on outline. Such graphics may also be given in the appendix to the detail specification. (8) Application or application group and (or) evaluation level. (9) Reference data of important characteristics for comparison between various types of capacitors.