SY/T 6961-2013
Truck-mounted reciprocating compressor set used in oil and gas fields (English Version)

Standard No.

SY/T 6961-2013

Language

Chinese, Available in English version

Release Date

2013

Published By

Professional Standard - Petroleum

Status

Be replaced 2022-02

Replace By

SY/T 6961-2021

Lastest

SY/T 6961-2021

Scope

This standard specifies the models and basic parameters, requirements, test methods, inspection rules, marking, packaging, transportation and storage of vehicle-mounted reciprocating compressors for oil and gas fields (hereinafter referred to as vehicle-mounted compressors). This standard applies to the design, manufacturing and quality inspection of vehicle-mounted reciprocating compressors for oil and gas fields.

SY/T 6961-2013 Referenced Document

• GB 11554 Photometric characteristics of rear fog lamp for power-driven vehicles and their trailers
• GB 11564 Retro reflector device for motor vehicles
• GB 11567.1 Motor vehicles and trailers--Lateral protection requirements
• GB 11567.2 Motor vehicles and trailers--Rear underrun protection requirements
• GB 1495 Limits and measurement methods for noise emitted by accelerating motor vethicles
• GB 150 Pressure Vessels (Bound Edition)*， 2024-04-21 Update
• GB 3836.1 Explosive atmospheres.Part 1:Equipment.General requirements
• GB 3836.10 Electrical apparatus for explosive atmospheres--Hermetically sealed electrical apparatus "h"
• GB 3836.11 Explosive atmospheres.Part11:Equipment protection by flameproof enclosures"d"method of test for ascertainment of maximum experimental safe gap
• GB 3836.12 Explosive atmospheres.Part 12:Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting current
• GB 3836.13 Explosive atmospheres.Part 13:Equipment repair, overhaul and reclamation*， 2013-12-17 Update
• GB 3836.14 Explosive atmospheres.Part 14:Classification of areas.Explosive gas atmosphere*， 2014-12-05 Update
• GB 3836.15 Electrical apparatus for explosive gas atmospheres. Part 15: Electrical installation in hazardous areas (other than mines)
• GB 3836.16 Electrical apparatus for explosive gas atmospheres.Part 16:Inspection and maintenance of electrical installation(other than mines)
• GB 3836.17 Electrical apparatus for explosive gas atmosphere Part 17: Construction and use of rooms or buildings protected by pressurization
• GB 3836.18 Explosive atmospheres.Part 18:Intrinsically safe system
• GB 3836.19 Explosive atmospheres.Part 19:Fieldbus intrinsically safe concept (FISCO)
• GB 3836.2 Explosive atmospheres.Part 2:Equipment protection by flameproof enclosures "d"
• GB 3836.20 Explosive atmospheres.Part 20:Equipment with equipment protection level(EPL)Ga
• GB 3836.3 Explosive atmospheres.Part 3:Equipment protection by increased safety "e"
• GB 3836.4 Explosive atmospheres.Part 4:Equipment protection by intrinsic safety "i"
• GB 3836.5 Electrical apparatus for explosive gas atmosphere-Part 5:Pressurized enclosures"p"
• GB 3836.6 Electrical apparatus for explosive gas atmospheres-Part 6:Oil-immersion"o"
• GB 3836.7 Electrical apparatus for explosive gas atmospheres-Part 7:Power filling"q"
• GB 3836.8 Explosive atmospheres.Part 8: Equipment protection by type of protection “n”*， 2014-12-05 Update
• GB 3836.9 Explosive atmospheres.Part 9:Equipment protection by type of protection "m"*， 2014-12-05 Update
• GB 3847 Limits and measurement methods for emissions from diesel vehicles under free acceleration and lugdown cycle*， 2018-09-27 Update
• GB 4208 Degrees of protection provided by enclosure(IP code)
• GB 4599 Motor vehicle headlamps equipped with filament lamps
• GB 4660 Photometric characteristics of power-driven vehicle front fog lamps*， 2016-12-30 Update
• GB 4785 Prescription for installation of the external lighting and light-signalling devices for motor vehicles and their trailers*， 2019-12-17 Update
• GB 5920 Photometric characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers*， 2019-04-04 Update
• GB 7258 Amendment No. 2 to Technical Conditions for Motor Vehicle Operation Safety
• GB 755 Rotating electrical machines.Rating and performance
• GB/T 12241 Safety valves—General requirements*， 2021-03-09 Update
• GB/T 12535 Test method of starting performance for motor vehicle*， 2021-10-11 Update
• GB/T 12538 Determination of the position of the center of mass of a road vehicle*， 2023-11-27 Update
• GB/T 12540 Measurement method of minimum turning diameter, minimum turning circle diameter and sway value of automobiles
• GB/T 228.1 Metallic materials—Tensile testing—Part 1: Method of test at room temperature*， 2021-12-31 Update
• GB/T 229 Metallic materials—Charpy pendulum impact test method*， 2020-09-29 Update
• GB/T 230.1 Metallic materials.Rockwell hardness test.Part 1:Test method*， 2018-05-14 Update
• GB/T 231.1 Metallic materials—Brinell hardness test—Part 1: Test method*， 2018-05-14 Update
• GB/T 3853 Displacement compressors—Acceptance tests*， 2017-11-01 Update
• GB/T 4980 Determination of sound level for noise emitted by displacement compressors
• GB/T 7777 Measurement and evaluation of mechanical vibration of displacement compressors*， 2021-12-31 Update
• GB/T 9115 Steel pipe welding neck flanges

SY/T 6961-2013 history

• 2021 SY/T 6961-2021 Oil and gas drilling equipment oil and gas field vehicle-mounted reciprocating compressor
• 2013 SY/T 6961-2013 Truck-mounted reciprocating compressor set used in oil and gas fields