Textile machinery

LVS EN ISO 11111-7:2005

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery

2005-05-31

This specification outlines the essential safety requirements specifically tailored for dyeing and finishing machinery within the textile industry. It establishes critical guidelines aimed at

LVS EN ISO 22291:2022

Safety requirements for wetlaid-nonwoven machinery (ISO 22291:2022)

2022-08-18

This technical specification establishes essential safety requirements specifically designed for machinery used in the production of wet-laid nonwoven fabrics. The document outlines critical safety

LVS EN ISO 23771:2015

Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions (ISO 23771:2015)

2015-08-20

This technical specification provides essential guidance for the design of textile machinery with the primary objective of reducing noise emissions. Developed through international collaboration, the

SM EN ISO 22291:2022

Security requirements for wet-laid nonwoven production machines

2022-06-10

This technical specification outlines the essential safety requirements for machinery utilized in the wet-forming production of nonwoven reinforcements. It addresses hazards associated with the

SM EN ISO 9902-6:2021

Textile machinery. Noise test code. Part 6: Fabric production machinery

2021-04-27

This technical specification outlines the measurement procedures for assessing the noise emission of machinery used in fabric manufacturing. It falls within a broader series of standards dedicated to

SM EN ISO 11111-1:2016

Maşini pentru industria textilă. Cerinţe de securitate. Partea 1: Cerinţe comune

2016-12-13

This document outlines the fundamental safety requirements applicable to machinery used within the textile manufacturing sector. Specifically, it establishes a comprehensive framework of essential

SM ISO 5243:2014

Standard for machines and accessories for the textile industry. Numbering of reed sley beams and reed bars on weaving machines

2014-10-07

This document addresses technical specifications related to textile machinery and accessories, specifically focusing on the identification systems employed in looms. It establishes standardized

SM ISO 96-2:2014

Textile machinery and accessories. Rings and shuttles for ring spinning and ring twisting machines. Part 2: "HZ" and "J" rings and their shuttles

2014-10-07

This specification establishes technical requirements and testing methods for steel rings and traveler rings specifically designed for spindle ring spinning frames and twisting machines used in the

SM ISO 8116-2:2014

Machines and accessories for the textile industry. Rolls for winding. Part 2: Warp rolls

2014-10-07

This document establishes technical specifications and requirements for beam-type spools utilized in the winding processes within the textile industry. It specifically addresses the second part of a

SM SR ISO 8116-8:2013

Machinery and accessories for the textile industry. Winding rolls. Part 8: Definition of run-out tolerances and measurement methods

2013-08-20

This technical document establishes the precise methodology for defining and measuring runout tolerances on spindles specifically designed for winding operations in textile machinery. It addresses

SM SR ISO 3914-1:2013

Textile Industry Machinery. Cylindrical Tubes. Part 1: Recommended Main Dimensions

2013-08-20

This document establishes recommended major dimensions for cylindrical tubes utilized within the textile industry machinery sector. The standard provides a comprehensive set of specifications

SM SR ISO 8489-2:2013

Textile industry machinery and accessories. Cross-winding conical tubes - Part 2: Dimensions, tolerances and designation of tubes with a half-angle at the apex of 3º 30'

2013-08-20

This document specifies the dimensional requirements, tolerances, and labeling conventions for conical tubes used in cross-winding applications within the textile machinery sector. Focusing on the

SM SR ISO 3914-6:2013

Textile industry machinery. Cylindrical tubes. Part 6: Dimensions, tolerances, and designation of tubes for cross-winding and twisting

2013-08-20

This specification establishes comprehensive requirements for cylindrical packages utilized in the textile industry, focusing specifically on dimensional parameters and tolerances. It addresses

SM SR ISO 3914-2:2013

Textile Industry Machinery. Cylindrical Tubes. Part 2: Dimensions, Tolerances and Designation of Tubes for Machines for Spinning Open-End Fibres

2013-08-20

This document establishes technical specifications for cylindrical spindles used in textile machinery, specifically addressing the second segment of a broader series. It defines precise dimensional

SM SR ISO 8489-4:2013

Textile machinery and accessories. Conical tubes for cross-winding. Part 4: Dimensions, tolerances, and notation of tubes with a semi-vertex angle of 4°20′ for dyeing winding

2013-08-20

This standard specifies the dimensional requirements, tolerances, and marking conventions for dyed winding tubes with a top angle half-angle of 4°20′, designed for use as cone tubes in cross-winding

SM SR ISO 10458:2013

Textile Industry Machinery. Square Bars for Winding, Used in Dyeing and Finishing Machines. Dimensions

2013-08-20

This document specifies dimensional requirements for square winding tubes employed within textile machinery dedicated to dyeing and finishing processes. It outlines precise measurements and

SM SR ISO 8489-1:2013

Machinery and accessories for the textile industry. Conical tubes for cross-winding. Part 1: Recommended principal dimensions

2013-08-20

This technical specification addresses the dimensions and specifications for conical tubes utilized in cross-wound textile machinery and their associated components. The document establishes

SM SR ISO 8116-7:2013

Machinery and accessories for the textile industry. Winding drums. Part 7: Drums for dyeing fibres and yarns

2013-08-20

This document establishes technical specifications for reels used in winding operations within the textile industry, with a specific focus on those designed for dyeing fiber and yarn. It defines the

SM SR ISO 8489-5:2013

Textile machinery and accessories. Conical tubes for cross-winding. Part 5: Dimensions, tolerances and marking of tubes with semi-cone angle of 5º 57'

2013-08-20

This technical document establishes precise specifications for conical tubes utilized in cross-winding machines within the textile sector. The scope focuses specifically on the fifth segment of the

SM SR ISO 8116-9:2013

Machines and accessories for the textile industry. Winding rolls. Part 9: Dyeing rolls for fabrics

2013-08-20

This document establishes technical specifications for winding devices utilized within the textile manufacturing sector, specifically addressing the ninth section focused on fabric dyeing drums. It