ICS 79.060
Wood-based panels
4 sub-categories · 2,688 standards
Sub-categories
Standards in This Category
LVS EN 319:2000
Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board
This document establishes a standardized procedure for evaluating the resistance of cork and fiber boards to bending forces applied perpendicular to their surface. The methodology defines the precise
LVS EN 318:2003
Wood based panels - Determination of dimensional changes associated with changes in relative humidity
This document outlines a standardized methodology for evaluating dimensional changes in wood-based panels resulting from fluctuations in relative humidity. The procedure provides a systematic
LVS EN 326-2+A1:2014
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
This document outlines specific procedures for sampling, cutting, and testing wood-based panels, focusing specifically on the second part of the series which addresses initial type testing and
LVS EN 408+A1:2012
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
This technical specification outlines the methods for determining specific physical and mechanical properties relevant to structural timber and glued laminated timber. It establishes a standardized
LVS EN 622-2:2004
Fibreboards - Specifications - Part 2: Requirements for hardboards
This technical specification establishes the fundamental requirements and testing methods for hardboard manufactured from lignocellulosic fibers. It defines the classification criteria based on
LVS EN 622-4:2024
Fibreboards - Specifications - Part 4: Requirements for softboards
This document specifies the technical requirements and test methods for soft fiberboards, which are wood-based panels produced by compressing wood fibers with the aid of heat and pressure. It defines
LVS EN 622-3:2004
Fibreboards - Specifications - Part 3: Requirements for medium boards
This technical specification addresses the requirements for medium density fiberboard as part of a broader series concerning specifications for fiberboard materials. The document outlines essential
LVS EN 622-1:2003
Fibreboards - Specifications - Part 1: General requirements
This technical specification establishes the fundamental requirements for fiberboard products, serving as a critical reference within the broader European framework for wood-based panels. It outlines
LVS EN 634-2:2007
Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
This technical specification establishes the essential requirements for ordinary Portland cement fiber boards, focusing on their performance across diverse environmental conditions. The document
LVS EN 622-5:2010
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
This technical specification outlines the requirements for medium density fibreboard produced using the dry process. It establishes precise definitions, classification criteria, and performance
LVS EN 633:2001
Cement-bonded particleboards - Definition and classification
This technical document establishes the fundamental definitions and classification system for wood particle boards based on cementitious binders. It specifies the terminology used throughout the
LVS EN 634-1:2001
Cement-bonded particleboards - Specification - Part 1: General requirements
This standard establishes the comprehensive specifications for cement-bonded particle boards, serving as a foundational document within the construction materials sector. It specifically outlines the
LVS EN 635-2:2002
Plywood - Classification by surface appearance - Part 2: Hardwood
This technical document establishes classification criteria specifically for veneer-faced plywood derived from broad-leaved tree species. It outlines the visual quality standards based on surface
LVS EN 636+A1:2015
Plywood - Specifications
This document establishes comprehensive specifications for gaskets utilized in various industrial and commercial applications. It defines the technical requirements, dimensions, and performance
LVS EN 635-5:2002
Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects
This document establishes a standardized approach for evaluating surface appearance characteristics in wood-based panels, specifically addressing the identification and terminology of inherent flaws.
LVS CEN/TS 635-4:2007
Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline
This technical specification addresses the classification of sheet and strip metal products based on their surface appearance, specifically focusing on the fourth section dedicated to surface
LVS EN 635-1:2002
Plywood - Classification by surface appearance - Part 1: General
This technical specification outlines the classification system for veneer based on the appearance of their surface. It establishes general principles applicable to the assessment of wood veneer
LVS EN 635-3:2002
Plywood - Classification by surface appearance - Part 3: Softwood
This document establishes specific classification criteria for plywood based on the visual appearance of its surface, specifically targeting materials manufactured from coniferous wood. It defines
LVS EN 717-3:1996
Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release dy the flask method
This specification outlines a standardized procedure for quantifying the emission of formaldehyde from lignin-based panels. It focuses specifically on the third method within a broader testing
LVS EN 717-1:2005
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
This technical specification outlines a standardized methodology for determining formaldehyde emissions from wood-based panels. It focuses specifically on the chamber testing procedure, which