ICS 93
CIVIL ENGINEERING
18 sub-categories · 28,651 standards
Sub-categories
93.010
Civil engineering in general
700 standards
93.020
Earthworks. Excavations. Foundation construction. Underground works
3,019 standards
93.025
External water conveyance systems
262 standards
93.030
External sewage systems
921 standards
93.040
Bridge construction
860 standards
93.060
Tunnel construction
220 standards
93.080
Road engineering
10,129 standards
93.080.01
Road engineering in general
1,264 standards
93.080.10
Road construction
713 standards
93.080.20
Road construction materials
4,981 standards
93.080.30
Road equipment and installations
1,702 standards
93.080.40
Street lighting and related equipment
385 standards
93.080.99
Other standards related to road engineering
403 standards
93.100
Construction of railways
1,421 standards
93.110
Construction of ropeways
11 standards
93.120
Construction of airports
217 standards
93.140
Construction of waterways and ports
398 standards
93.160
Hydraulic construction
1,045 standards
Standards in This Category
nsBAS CEN/TR 16907-8:2026
ISBIH
Earthworks - Part 8: Alternative materials in earthworks
nsBAS CEN/TS 12697-52:2026
ISBIH
Bituminous mixtures - Test methods - Part 52: Conditioning to address oxidative ageing
nsBAS CEN/TS 12697-51:2026
ISBIH
Bituminous mixtures - Test methods - Part 51: Surface shear strength test
nsBAS CEN/TR 14380:2026
ISBIH
Lighting applications - Tunnel lighting
nsBAS EN 12697-22+A1:2026
ISBIH
Bituminous mixtures - Test methods - Part 22: Wheel tracking
nsBAS EN 12352:2026
ISBIH
Traffic control equipment - Warning and safety light devices
nsBAS EN 12697-16:2026
ISBIH
Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres
nsBAS EN 12063:2026
ISBIH
Execution of special geotechnical work - Sheet pile walls, combined pile walls, high modulus walls
nsBAS EN 12368:2026
ISBIH
Traffic control equipment - Signal heads
nsBAS EN 12697-2:2026
ISBIH
Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
nsBAS EN 13863-5:2026
ISBIH
Concrete pavements - Part 5: Determination of the bond stress of dowels to be used in concrete pavements
nsBAS EN 12767+A1:2026
ISBIH
Passive safety of support structures for road equipment - Requirements and test methods
nsBAS EN 13036-8:2026
ISBIH
Road and airfield surface characteristics - Test methods - Part 8: Determination of transverse unevenness and crossfall indices
nsBAS EN 13880-3:2026
ISBIH
Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
nsBAS EN 13806-1:2026
ISBIH
Foodstuffs - Determination of trace elements - Part 1: Determination of total mercury in foodstuffs by atomic absorption spectrometry (AAS) - cold vapour technique after pressure digestion
nsBAS EN 13880-4:2026
ISBIH
Hot applied joint sealants - Part 4: Test method for the characterization of heat resistance - Change in penetration value
nsBAS EN 13863-6:2026
ISBIH
Concrete pavements - Part 6: Test method for the determination of the tensile strength of concrete on cylindrical discs
nsBAS EN 13848-4:2026
ISBIH
Railway applications - Track - Track geometry quality - Part 4: Measuring systems - Manual and lightweight devices
nsBAS EN 12697-35:2026
ISBIH
Bituminous mixtures - Test methods - Part 35: Laboratory mixing
nsBAS EN 13880-5:2026
ISBIH