ISO 4397:1993
ISO · 1993-02
Fluid power systems and components; connectors and associated components; nominal outside diameters of tubes and nominal inside diameters of hoses
1Key Takeaways
Specifies two series of diameters: a series of nominal outside diameters for rigid or semi-rigid tubes, irrespective of material composition, and a series of nominal inside diameters for hoses made of rubber or plastic.
2Scope / Description
Specifies two series of diameters: a series of nominal outside diameters for rigid or semi-rigid tubes, irrespective of material composition, and a series of nominal inside diameters for hoses made of rubber or plastic.
3Version History
5Citation Network
11
Cite this standard
0
Referenced herein
Standards that cite ISO 4397:1993
Flares for Tubing
Welded Flash Controlled, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Double Flaring
Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
Tests and Procedures for Carbon Steel and Low Alloy Steel Tubing
Nominal Reference Working Pressures for Steel Hydraulic Tubing
Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring
Hose Assemblies, Hydraulic, J517 100R Series Hose Part 3: Procurement and Ordering Information
6Frequently Asked Questions
What is ISO 4397:1993?
ISO 4397:1993 — Fluid power systems and components; connectors and associated components; nominal outside diameters of tubes and nominal inside diameters of hoses is an international standard developed by International Organization for Standardization (ISO). Specifies two series of diameters: a series of nominal outside diameters for rigid or semi-rigid tubes, irrespective of material composition, and a series of nominal inside diameters for hoses made of rubber or plastic.
What does ISO 4397:1993 cover?
This standard covers: Specifies two series of diameters: a series of nominal outside diameters for rigid or semi-rigid tubes, irrespective of material composition, and a series of nominal inside diameters for hoses made of rubber or plastic.
Who should use this standard?
This standard is intended for organizations, professionals, and stakeholders involved in various industries and sectors. It is applicable to manufacturers, service providers, regulatory bodies, and certification organizations.
What is the latest version of ISO 4397:1993?
The current published version is ISO 4397:1993, published on 1993-02. Always check for amendments or pending revisions.
How do I purchase ISO 4397:1993?
You can purchase ISO 4397:1993 by visiting our contact page. Click "Get This Standard" to view pricing and send a purchase inquiry. Our team will respond with payment and delivery details.