1Key Takeaways
This part of EN 12881 describes three methods for measuring the propagation of a flame along a conveyor
belt which has been exposed to a relatively high localised heat source such as a fire. The damage suffered by
the conveyor belt, as well as its tendency to support combustion, are measured by observing the extent t…
2Scope / Description
This part of EN 12881 describes three methods for measuring the propagation of a flame along a conveyor
belt which has been exposed to a relatively high localised heat source such as a fire. The damage suffered by
the conveyor belt, as well as its tendency to support combustion, are measured by observing the extent to
which the fire spreads along the test piece.
Method A uses a test piece 2 m in length and consumes propane gas through the burner at the rate of
(1,30 ± 0,05) kg per 10 min.
Method B uses a test piece 2,5 m in length and consumes propane gas through two burners mounted above
and below the test piece trestle at the rate of (1,30 ± 0,05) kg per 10 min for each burner.
Method C uses a test piece 1,5 m in length and consumes propane gas through the burner at the rate of
(565 ± 10) g per 50 min.
5Citation Network
Standards that cite EN 12881-1:2005
Referenced by EN 12881-1:2005
EN 10088-3
EN 22768-1:1993
ISO 65
ISO 9162:1989
6Frequently Asked Questions
What is EN 12881-1:2005?
EN 12881-1:2005 — Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests Incorporates Amendment A1: 2008 is an international standard developed by European Committee for Standardization (CEN). This part of EN 12881 describes three methods for measuring the propagation of a flame along a conveyor belt which has been exposed to a relatively high localised heat source such as a fire. The damage suffered by the conveyor belt, as well as its...
What does EN 12881-1:2005 cover?
This standard covers: This part of EN 12881 describes three methods for measuring the propagation of a flame along a conveyor belt which has been exposed to a relatively high localised heat source such as a fire. The damage suffered by the conveyor belt, as well as its tendency to support combustion, are measured by...
Who should use this standard?
This standard is intended for organizations, professionals, and stakeholders involved in various industries and sectors. It is applicable to manufacturers, service providers, regulatory bodies, and certification organizations.
What is the latest version of EN 12881-1:2005?
The current published version is EN 12881-1:2005, published on 2005. Always check for amendments or pending revisions.
How do I purchase EN 12881-1:2005?
You can purchase EN 12881-1:2005 by visiting our contact page. Click "Get This Standard" to view pricing and send a purchase inquiry. Our team will respond with payment and delivery details.