1Key Takeaways
This part of ISO 3977 covers the design requirements for the procurement of all applications of gas turbines
and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a
purchaser from a packager. It also provides assistance and technical information to be used in the
procur…
2Scope / Description
This part of ISO 3977 covers the design requirements for the procurement of all applications of gas turbines
and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a
purchaser from a packager. It also provides assistance and technical information to be used in the
procurement.
It is not intended to deal with local or national legislative requirements with which the installation may be
required to conform.
This part of ISO 3977 is applicable to simple-cycle, combined-cycle and regenerative-cycle gas turbines
working in open systems. It is not applicable to gas turbines used to propel aircraft, road construction and
earth moving machines, agricultural and industrial types of tractors and road vehicles.
In cases of gas turbines using special heat sources (for example, chemical process, nuclear reactors, furnace
for a super-charged boiler), this part of ISO 3977 provides a basis.
The relevant parts of ISO 3977 are applicable to closed and semi-closed systems.
NOTE Additional requirements for special gas turbine applications are described in ISO 3977-5.
5Citation Network
Standards that cite ISO 3977-3:2004
Gas turbine applications. Requirements for power generation
Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
Petroleum and natural gas industries - Pipeline transportation systems
Mechanical vibration. Measurement and evaluation of machine vibration. Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine sets with fluid-film bearings (ISO 10816-4:2009 + Amd.1:2017)
Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings
Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings (ISO 20816-4:2018)
Gas turbine applications - Safety
Referenced by ISO 3977-3:2004
ASME
IEC 60034-1
IEC 60079 (all parts)
ISO 10441:1999
ISO 10442:2002
ISO 10494:1993
ISO 10814:1996
ISO 10816-1:1995
6Frequently Asked Questions
What is ISO 3977-3:2004?
ISO 3977-3:2004 — Gas turbines - Procurement - Part 3: Design requirements is an international standard developed by International Organization for Standardization (ISO). This part of ISO 3977 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also...
What does ISO 3977-3:2004 cover?
This standard covers: This part of ISO 3977 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be...
Who should use this standard?
This standard is intended for organizations, professionals, and stakeholders involved in various industries and sectors. It is applicable to manufacturers, service providers, regulatory bodies, and certification organizations.
What is the latest version of ISO 3977-3:2004?
The current published version is ISO 3977-3:2004, published on 2004-08. Always check for amendments or pending revisions.
How do I purchase ISO 3977-3:2004?
You can purchase ISO 3977-3:2004 by visiting our contact page. Click "Get This Standard" to view pricing and send a purchase inquiry. Our team will respond with payment and delivery details.