IEC 60191-2:1966
IEC · 1966-01-01

Mechanical standardization of semiconductor devices. Part 2 : Dimensions

Replaced ICS 31.240 Cited by 17

1Key Takeaways

Deals with device outline drawings, base drawings and case outline drawings, and provides tables showing associations between case outlines and bases. Cover page is replaced by amendment R and S (1995).

2Scope / Description

Deals with device outline drawings, base drawings and case outline drawings, and provides tables showing associations between case outlines and bases. Cover page is replaced by amendment R and S (1995).

3Version History

IEC 60191-2:1966 1966-01-01
IEC 60191-2:1966/AMD1:2001 Amd 1/2001 newer 2001-03-15
IEC 60191-2:1966/AMD2:2001 Amd 2/2001 newer 2001-06
IEC 60191-2:1966/AMD3:2001 Amd 3/2001 newer 2001-08-28
IEC 60191-2:1966/AMD4:2001 Amd 4/2001 newer 2001-11-27
IEC 60191-2:1966/AMD5:2002 Amd 5/2002 newer 2002-02
IEC 60191-2:1966/AMD6:2002 Amd 6/2002 newer 2002-05-01
IEC 60191-2:1966/AMD7:2002 Amd 7/2002 newer 2002-05
IEC 60191-2:1966/AMD8:2003 Amd 8/2003 newer 2003-06-27
IEC 60191-2:1966/AMD9:2003 Amd 9/2003 newer 2003-11
IEC 60191-2:1966/AMD10:2004 Amd 10/2004 newer 2004-03
IEC 60191-2:1966/AMD11:2004 Amd 11/2004 newer 2004-11-23
IEC 60191-2:1966/AMD12:2006 Amd 12/2006 newer 2006-03
IEC 60191-2:1966/AMD13:2006 Amd 13/2006 newer 2006-07-17
IEC 60191-2:1966/AMD14:2006 Amd 14/2006 newer 2006-07
IEC 60191-2:1966/AMD15:2006 Amd 15/2006 newer 2006-07
IEC 60191-2:1966/AMD16:2007 Amd 16/2007 newer 2007-07
IEC 60191-2:1966/AMD17:2008 Amd 17/2008 newer 2008-05
IEC 60191-2:1966/AMD18:2011 Amd 18/2011 newer 2011-11
IEC 60191-2:1966/AMD19:2012 Amd 19/2012 newer 2012-10
IEC 60191-2:1966/AMD20:2018 Amd 20/2018 newer 2018-04-12
IEC 60191-2:1966/AMD21:2020 Amd 21/2020 newer 2020-02-13

4Standard Metadata

Standard Number
IEC 60191-2:1966
Status
Replaced
Publisher
International Electrotechnical Commission (IEC)
Publication Date
1966-01-01
Implementation
2007-08-09
ICS Classification
31.240 (Mechanical structures for electronic equipment) 
Adopted Standard
DIN 41866-1-1980,MOD;DIN 41866-2-1980,MOD;DIN 41872-1973,MOD;DIN 41875-1973,MOD;DIN 41878-1983,MOD;DIN 41882-3-1980,MOD;DIN 41885-1976,MOD;DIN 41886-1974,MOD;DIN 41887-1974,MOD;DIN 41888-1976,MOD;DIN 41889-1974,MOD;DIN 41891-1980,IDT;BS 3934-1965,MOD;BS 3

5Citation Network

17
Cite this standard
0
Referenced herein
Standards that cite IEC 60191-2:1966
Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA Connectors for frequencies below 3 MHz for use with printed boards.Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits Packaging of components for automatic handing.Part 3:Packaging of surface mount components on continuous tapes Electronic paper displays. Terminology Printed boards and printed board assemblies. Design and use. Part 5-6. Attachment (land/joint) considerations. Chip carriers with J-leads on four sides Printed boards and printed board assemblies. Design and use. Part 5-8. Attachment (land/joint) considerations. Area array components (BGA, FBGA, CGA, LGA) Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA)

6Frequently Asked Questions

What is IEC 60191-2:1966?
IEC 60191-2:1966 — Mechanical standardization of semiconductor devices. Part 2 : Dimensions is an international standard developed by International Electrotechnical Commission (IEC). Deals with device outline drawings, base drawings and case outline drawings, and provides tables showing associations between case outlines and bases. Cover page is replaced by amendment R and S (1995).
What does IEC 60191-2:1966 cover?
This standard covers: Deals with device outline drawings, base drawings and case outline drawings, and provides tables showing associations between case outlines and bases. Cover page is replaced by amendment R and S (1995).
Who should use this standard?
This standard is intended for organizations, professionals, and stakeholders involved in various industries and sectors. It is applicable to manufacturers, service providers, regulatory bodies, and certification organizations.
What is the latest version of IEC 60191-2:1966?
The current published version is IEC 60191-2:1966, published on 1966-01-01. Always check for amendments or pending revisions.
How do I purchase IEC 60191-2:1966?
You can purchase IEC 60191-2:1966 by visiting our contact page. Click "Get This Standard" to view pricing and send a purchase inquiry. Our team will respond with payment and delivery details.
Get IEC 60191-2:1966 — Price & Contact →