This standard specifies the technical requirements for fusion-bonded epoxy powder outer coatings for steel pipelines. This standard applies to the design, construction and inspection of single-layer and double-layer structure sintered epoxy powder outer coatings for steel pipelines (including steel straight pipes and hot-simmered bent pipes, hereafter referred to as steel pipes). Coated steel pipes can be used in buried or underwater environments with working temperatures of -30°C to 80°C. Other working conditions can be implemented as a reference.
SY/T 0315-2013 Referenced Document
GB 50369 Code for construction and acceptance of oil and gas long-distance transmission pipeline engineering*, 2014-05-29 Update
GB 7692 Safety code for painting.Safety、ventilation and air clean-up for pretreatment process of painting
GB/T 1408.1 Insulating materials.Test methods for electric strength.Part 1:Test at power frequencies*, 2016-12-13 Update
GB/T 1410 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
GB/T 18570.2 Preparation of steel substrates before application of paints and related products.Tests for the assesssment of surface cleanliness.Part 2:Laboratory determination of chloride on cleaned surfaces
GB/T 18570.3 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 3:Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
GB/T 19001 Quality Management System Requirements*, 2017-07-01 Update
GB/T 4472 Detemination of density and relative density for chemical products
GB/T 5330 Industrial woven metal wire cloth (square opening series)
GB/T 6554 Resin based reactive compounds used for electrical insulation Part 2:Methods of test:Methods for coating pourders for electrical purposes
GB/T 8923.1 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coa
GBJ 87 Specifications for the design of noise control system in industrial enterprises
GBZ 1 Hygienic standards for the design of industrial enterprises
JB/T 6570 Method for determination of magnetic content of ordinary abrasives*, 2020-04-16 Update
SY/T 4113 Test method for measurement of gouge resistance of coating system
SY/T 0315-2013 history
2013SY/T 0315-2013 Technological specification of external fusion bonded epoxy coating for steel pipeline
2005SY/T 0315-2005 Technological standard of FBE external fusion bonded epoxy coating for steel pipeline
1997SY/T 0315-1997 Technological standard of external fusion bonded epoxy coating for steel pipeline