ICS 23.040
Pipeline components and pipelines
11 sub-categories · 21,578 standards
Sub-categories
23.040.01
Pipeline components and pipelines in general
2,551 standards
23.040.10
Iron and steel pipes
3,110 standards
23.040.15
Non-ferrous metal pipes
767 standards
23.040.20
Plastics pipes
5,305 standards
23.040.40
Metal fittings
1,606 standards
23.040.45
Plastics fittings
1,052 standards
23.040.50
Pipes and fittings of other materials
897 standards
23.040.60
Flanges, couplings and joints
2,481 standards
23.040.70
Hoses and hose assemblies
2,645 standards
23.040.80
Seals for pipe and hose assemblies
651 standards
23.040.99
Other pipeline components
513 standards
Standards in This Category
ASTM E1118/E1118M-26
ASTM
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
This practice document outlines specific procedures for evaluating pipe reinforcement systems composed of thermosetting resins through nondestructive testing techniques. It provides detailed
KS M 6560
KATS
Rubber hoses for chemical use
This document establishes comprehensive technical specifications for chemical-resistant rubber hoses intended for industrial applications. It delineates the necessary performance criteria, ensuring
KS M 6556
KATS
Rubber hose for water spraying
This standard establishes comprehensive technical specifications for rubber hoses designed specifically for water spray applications. It delineates the necessary requirements for material
KS M 6547
KATS
rubber hose for agricultural sprayers
This technical specification outlines the essential requirements and test methods for rubber hoses specifically designed for use in agricultural sprayers. The document addresses critical performance
BS ISO 24131-4:2026
BSI
Internal protection by polymeric lining for ductile iron pipes. Requirements and test methods - Ceramic epoxy lining
nsBAS CEN/TR 1591-6:2026
ISBIH
Flanges and their joints - Design rules for gasketed circular flange connections - Part 6: Background information
nsBAS CEN/TS 17889:2026
ISBIH
District heating pipes - Factory made flexible pipe systems - Classification, requirements and test methods for bonded or non-bonded system with thermoplastic reinforced service pipes (TRSP)
nsBAS EN 12007-5:2026
ISBIH
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements
nsBAS EN 1254-6+A1:2026
ISBIH
Copper and copper alloys - Plumbing fittings - Part 6: Push-fit fittings for use with metallic tubes, plastics and multilayer pipes
nsBAS EN 1254-20+A1:2026
ISBIH
Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information
nsBAS EN 1254-3+A1:2026
ISBIH
Copper and copper alloys - Plumbing fittings - Part 3: Compression fittings for use with plastics and multilayer pipes
nsBAS EN 1254-8+A1:2026
ISBIH
Copper and copper alloys - Plumbing fittings - Part 8: Press fittings for use with plastics and multilayer pipes
nsBAS EN 10216-2:2026
ISBIH
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
nsBAS EN 12735-2:2026
ISBIH
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
nsBAS EN 15266:2026
ISBIH
Stainless steel pliable corrugated tubing kits for gas installation pipework with an operating pressure up to 0,2 MPa (2 bar)
nsBAS EN 15698-1:2026
ISBIH
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 1: Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
nsBAS EN 448:2026
ISBIH
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
nsBAS EN ISO 15465:2026
ISBIH
Pipework - Stripwound metal hoses and hose assemblies
nsBAS EN ISO 18752:2026
ISBIH
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification
nsBAS ISO 10803:2026
ISBIH