ISO 6162-2:2002
ISO · 2002-12

Hydraulic fluid power - Flange connectors with split or one-piece flange champs and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51

Replaced ICS 23.100.40 Cited by 8

1Key Takeaways

This part of ISO 6162 specifies complete general and dimensional characteristics for flange heads, split flange clamps (FCS), one-piece flange clamps (FC) and ports applicable to four-screw, split and one-piece flange clamp type tube and hose connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar). It a…

2Scope / Description

This part of ISO 6162 specifies complete general and dimensional characteristics for flange heads, split flange clamps (FCS), one-piece flange clamps (FC) and ports applicable to four-screw, split and one-piece flange clamp type tube and hose connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar). It also specifies the dimensions of the seals to be used, as well as the grooves to house the seal. This part of ISO 6162 also recognizes the need to accommodate metric (type 1) screw fasteners, as well as to provide a means to use existing inch (type 2) screw fasteners. These connectors are intended for application in hydraulic systems on industrial and commercial products, where it is desired to avoid the use of threaded connectors. Surges of pressure higher than the nominal ratings will reduce the ability of the flange connectors to retain the hydraulic fluid. This should be taken into account in the design of the hydraulic system. note: 1) 1 bar = 0,1 MPa = 10 Pa; 1 Pa = 1 N/m.

3Version History

ISO 6162-2:2002 2002-12
ISO 6162-2:2012 newer 2012-12-15
ISO 6162-2:2018 newer 2018-03-01

4Standard Metadata

Standard Number
ISO 6162-2:2002
Status
Replaced
Publisher
International Organization for Standardization (ISO)
Publication Date
2002-12
ICS Classification
23.100.40 (Piping and couplings) 

5Citation Network

8
Cite this standard
0
Referenced herein
Standards that cite ISO 6162-2:2002
Nominal Reference Working Pressures for Steel Hydraulic Tubing Hydraulic fluid power - General rules and safety requirements for systems and their components Oscillating displacement pumps and pump units. Technical requirements Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003); German version EN ISO 16330:2003 Reciprocating positive displacement pumps and pump units - Technical requirements Reciprocating positive displacement pumps and pump units - Technical requirements Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003) Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003); German version EN ISO 16330:2003

6Frequently Asked Questions

What is ISO 6162-2:2002?
ISO 6162-2:2002 — Hydraulic fluid power - Flange connectors with split or one-piece flange champs and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 is an international standard developed by International Organization for Standardization (ISO). This part of ISO 6162 specifies complete general and dimensional characteristics for flange heads, split flange clamps (FCS), one-piece flange clamps (FC) and ports applicable to four-screw, split and one-piece flange clamp type tube and hose...
What does ISO 6162-2:2002 cover?
This standard covers: This part of ISO 6162 specifies complete general and dimensional characteristics for flange heads, split flange clamps (FCS), one-piece flange clamps (FC) and ports applicable to four-screw, split and one-piece flange clamp type tube and hose connectors for use at pressures of 35 MPa (350 bar) to...
Who should use this standard?
This standard is intended for organizations, professionals, and stakeholders involved in various industries and sectors. It is applicable to manufacturers, service providers, regulatory bodies, and certification organizations.
What is the latest version of ISO 6162-2:2002?
The current published version is ISO 6162-2:2002, published on 2002-12. Always check for amendments or pending revisions.
How do I purchase ISO 6162-2:2002?
You can purchase ISO 6162-2:2002 by visiting our contact page. Click "Get This Standard" to view pricing and send a purchase inquiry. Our team will respond with payment and delivery details.
Get ISO 6162-2:2002 — Price & Contact →