ISO 18278-2:2004
ISO · 2004-11

Resistance welding - Weldability - Part 2: Alternative procedures for the assessment of sheet steels for spot welding

Replaced ICS 25.160.40 Cited by 7

1Key Takeaways

This document specifies a laboratory test procedure for the determination of the acceptable welding current range and the assessment of electrode life using a multi-spot test with specific conditions. This document is applicable for the assessment of the weldability of uncoated and coated sheet steels of thicknesses up…

2Scope / Description

This document specifies a laboratory test procedure for the determination of the acceptable welding current range and the assessment of electrode life using a multi-spot test with specific conditions.
This document is applicable for the assessment of the weldability of uncoated and coated sheet steels of thicknesses up to 3 mm.
The test procedure specified in this document and the results obtained, apply only for the introduction of a new type or batch of material.
Procedures for determining the generic weldability lobe at a constant weld time or electrode force are given in EN ISO 14327.
The electrode life at constant machine settings is given in EN ISO 8166.

3Version History

ISO 18278-2:2004 2004-11
ISO 18278-2:2016 newer 2016-01-01

4Standard Metadata

Standard Number
ISO 18278-2:2004
Status
Replaced
Publisher
International Organization for Standardization (ISO)
Publication Date
2004-11
ICS Classification
25.160.40 (Welded joints and welds) 
Adopted Standard
DIN EN ISO 18278-2-2005,IDT;DIN EN ISO 18278-2-2002,IDT;BS EN ISO 18278-2-2004,IDT;EN ISO 18278-2-2004,IDT;NF A87-001-2-2005,IDT;SN EN ISO 18278-2-2005,IDT;OENORM EN ISO 18278-2-2005,IDT;PN-EN ISO 18278-2-2005,IDT;UNE-EN ISO 18278-2-2006,IDT

5Citation Network

7
Cite this standard
13
Referenced herein
Standards that cite ISO 18278-2:2004
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012 + Cor. 1:2012); German version CEN ISO Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot@ seam and projection welding of metallic materials Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding — Technical Corrigendum 1 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding Health and safety in welding and allied processes — Laboratory method for sampling fume and gases Part 6 : Procedure for quantitative determination of fume from resistance spot welding Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012)
Referenced by ISO 18278-2:2004
EN 22768-1 EN 22768-2 EN 25821 EN ISO 14272 EN ISO 14327 EN ISO 14329:2003 EN ISO 18278-1:2004 EN ISO 5183-1

6Frequently Asked Questions

What is ISO 18278-2:2004?
ISO 18278-2:2004 — Resistance welding - Weldability - Part 2: Alternative procedures for the assessment of sheet steels for spot welding is an international standard developed by International Organization for Standardization (ISO). This document specifies a laboratory test procedure for the determination of the acceptable welding current range and the assessment of electrode life using a multi-spot test with specific conditions. This document is applicable for the assessment...
What does ISO 18278-2:2004 cover?
This standard covers: This document specifies a laboratory test procedure for the determination of the acceptable welding current range and the assessment of electrode life using a multi-spot test with specific conditions. This document is applicable for the assessment of the weldability of uncoated and coated sheet...
Who should use this standard?
This standard is intended for organizations, professionals, and stakeholders involved in various industries and sectors. It is applicable to manufacturers, service providers, regulatory bodies, and certification organizations.
What is the latest version of ISO 18278-2:2004?
The current published version is ISO 18278-2:2004, published on 2004-11. Always check for amendments or pending revisions.
How do I purchase ISO 18278-2:2004?
You can purchase ISO 18278-2:2004 by visiting our contact page. Click "Get This Standard" to view pricing and send a purchase inquiry. Our team will respond with payment and delivery details.
Get ISO 18278-2:2004 — Price & Contact →